Rental Inventory

Return to Rental Inventory

AERATOR-DRUM CORING,(28IN.WIDE)

Improved air exchange between the soil and atmosphere. Enhanced soil water uptake. Improved fertilizer uptake and use. Reduced water runoff and puddling. Stronger turfgrass roots. Reduced soil compaction. Enhanced heat and drought stress tolerance.

Click Here for More Information

AERATOR-DRUM CORING,(38IN.WIDE)

Improved air exchange between the soil and atmosphere. Enhanced soil water uptake. Improved fertilizer uptake and use. Reduced water runoff and puddling. Stronger turfgrass roots. Reduced soil compaction. Enhanced heat and drought stress tolerance.

Click Here for More Information

AERATOR-PULL,(3FT.WIDE)-PLUG

Improved air exchange between the soil and atmosphere. Enhanced soil water uptake. Improved fertilizer uptake and use. Reduced water runoff and puddling. Stronger turfgrass roots. Reduced soil compaction. Enhanced heat and drought stress tolerance.

Click Here for More Information

AERATOR-PUSH

Anything is better than nothing!!

Click Here for More Information

AIR CONDITIONER,(1.1-TON)

Great for cooiling a new space, supplemental cooling for tenant space or back-up emergency spot cooling for your computer room or data center.

Click Here for More Information

BACKHOE-CAT-416D,(18FT-4WD)


Digging Depth

18 ft. 1 in.
Backhoe Bucket Size 24 in.
Backhoe Lift Capacity 4,642 lbs.
Loader Dump Height 10 ft. 10 in.
Loader Lift Capacity 4,642 lbs.
Overall Width 7 ft. 5 in.
Power Rating 86 hp.
Fuel Type Diesel
Powertrain 4-Wheel Drive
Weight 16,882 lbs.

Click Here for More Information

BARRICADE-8' W/BASE FEET

Height 43 in.
Length 8 Ft.
Frame Tube
Diameter
1-1/2 In.
Vertical Bars
Diameter
5/8 in.
Weight 57 lbs.
Flat Leg Width 24 in.

Click Here for More Information

BENDER-EMT/RIDGID,(1/2IN-2IN)

  • Four-in-one-shoe handles 1', 1-1/4', 1-1/2, 2' EMT, IMC and Rigid steel and aluminum conduit.
  • Puncture-proof pneumatic tires with steel rims and precision ball bearings for tough jobsite conditions.
  • Quickly remove the shoe and bridge to reduce weight for easy handling.
  • Easy to load and unload.
  • Squeeze adjustment to compensate for conduit variations. Smooth wrinkle-free bends.

Click Here for More Information

BENDER-PVC/HEATER,(1/2

Easy to use: preheat for 10 minutes, open lid and position PVC, close lid, rotate until pliable, open lid, remove PVC and form bend.
  • Heavy-duty, insulated metal walls and cover with reflective interior for efficient, even heat.
  • Full length door for easy loading and unloading.
  • On/off switch with indicator light.
  • Sturdy wheels for easy mobility.

Click Here for More Information

BLOWER-INSULATION

 

Our FORCE/1 package processes over 540 lbs of cellulose or 187 lbs of fiberglass per hour and weighs 177 lbs.  The durability of this unit is enhanced with urethane seals, a direct drive transmission, and polyethylene construction which resists dents & dings, allowing for an attractive system appearance over years of use.  This system provides ease of transportation to the job site in addition to timely installation of attic insulation – either cellulose or fiberglass -- at 2 hours for R-19 in 1500 square foot attic

Click Here for More Information

BLOWER-STRAW

The B70 Straw Blower is perfect for the mid-size mulching projects such as home sites, industrial and commercial projects, and highway roadsides. With the versatile B70 you can do a number of applications including seed protection, soil stabilization, erosion control and straw mulch applications.

Click Here for More Information

BLOWER-TURBO DRYER

For drying under:

  • Carpets
  • Cabinets
  • Walls
  • Crawlspaces

 

Click Here for More Information

CAMERA-SEESNAKE-MINI

1 1/2’’ lines up to 200’
At 25 pounds, the Mini-SeeSnake combines portability with a rugged camera used to inspect lines up to 200 feet. It is built tougher for unmatched durability, reliability and performance.

Click Here for More Information

CAMERA-SEESNAKE-PLUS

  • Inspects 3" lines and larger:
  • 3" P-Traps.
  • Rugged, high-intensity lights for improved reliability.
  • Flexible transmitter makes locating easier and is fully compatible with RIDGID SeeTech SR-60 locators.
  • Compatible with any SeeSnake monitor.

Click Here for More Information

CARPET-STEAMER,(COMPACT)

Carpet & upholstery cleaning hot-water extractors are perfect for the homeowner who wants a professional machine that is built to last, and for businesses needing a compact, lightweight commercial machine.

  • Upholstery attachment included with rental

Click Here for More Information

CHAINSAW-14IN.,(ELECTRIC)

  • Toolless Quick Chain Adjuster for fast and easy chain adjustment
  • Coast-down brake as an additional braking system
  • Thermal overload cut-off switch
  • Wide trigger switch
  • Automatic cut-off when brushes become worn

 

Click Here for More Information

CHAINSAW-15IN.,(CONCRETE)-PKG

ICS Concrete Chain Saws let you make deeper, cleaner and more accurate cuts, in less time. Deeper cuts and square corners means getting the job done with fewer steps. No more trying to match up cuts from both sides. No more impact tools that risk damage to the surrounding concrete or masonry. No more over-cutting corners.

 

Note: Does not include diamond chain ask store for details.

Click Here for More Information

CHAINSAW-18IN.,(2/CYCLE)

  • Decompression valve
  • Adjustable automatic bar and chain oiler
  • IntelliCarb compensating carburetor
  • Side-access chain tensioner
  • Toolless fuel and oil caps with retainers

 

Click Here for More Information

CLAMP-INDUCTIVE ST-33Q

 

Features
The RIDGID Inductive clamp allows users to apply a signal to a cable or pipe when connecting directly to the target conductor is not possible.
The clamp couples the transmitting signal onto the conductor which then allows users to locate using a
compatible receiver, such as the SeeTech SR-60.
Two built in LED’s inform the user the clamp is functioning properly.
An integrated adapter allows users to attach a hotstick for out of reach lines.

Click Here for More Information

CLEARBLAST-150,(WET ABRASIVE BLASTER)

Specifications
***Price Does Not Include Air Compressor***
   
Dimensions 48in.L x 26in.W x 48in.H
   
Weight 350Lbs. Dry
  673Lbs. Wet
   
Air Capacity 100-400cfm
   
Pot Media Capacity 100Lbs.
   
Onboard Water Capacity 25Gallons
   
Blast Hose Length 50ft.
   
   

Click Here for More Information

COMPRESSOR---8HP.,(GAS)

Ideal For: 2 EDCO ALR model Chisel Scalers 1 EDCO ALR Big Stick™ 6-8 Framing/Sheathing guns 8-10 Roofing guns

Click Here for More Information

COMPRESSOR-1.5HP.,(ELECTRIC)

Best CFM in class 4.0 CFM of free air@100psi

Click Here for More Information

COMPRESSOR-185CFM

Possible to use more than one air tool at a time. Delivers 90 cfm from each air outlet.

Click Here for More Information

CONVEYOR, (24FT X 13IN)

All steel construction

10” wide heavy duty 3 ply belt with 2” buckets

½ hp -110 v electric motor

Direct drive speed reducer

 Constant belt speed of 160 feet/ minute

 

 

Click Here for More Information

CUTTER-PIPE,(CAST)-RACHET

  • Cuts 1 1/2"-6" clay, cast-iron or cement pipe and 4" class 22 water main.
  • Ratchet-action handle parallel to pipe allows for application in minimum width trenches.
  • Complete with hand guard to protect operator’s knuckles when cutting.

 

Click Here for More Information

CUTTER-TILE,(VINYL)

Accurate and simple to use
• Self-measuring stop automatically aligns at last field tile
• Cuts 12" x 12" tile straight

Click Here for More Information

DEHUMIDIFIER

  • Removes up to 15 gallons a day
  • Hot-gas bypass for fast defrost
  • Electronic touch-pad controls
  • Rigid handle – designed for rugged service
  • Semi-pneumatic wheels for easy transport

Click Here for More Information

DEHUMIDIFIER,(1GPH)

  • Up to 28 gallons a day
  • Low grain refrigerant with patented heat pipe technology
  • Electronic touch-pad controls
  • Semi-pneumatic wheels
  • Built-in ring for easy attachment of ducting

 

Click Here for More Information

DETECTOR-LEAK, (SUBSURFACE)

Survey for water leaks by listening at hydrants and valves with the sensor and magnet. Survey at water meters with a Long Contact Rod

Pinpoint water leaks in pipes under asphalt or concrete with the base plate attached to the sensor and magnet

Click Here for More Information

DETECTOR-MAGNA TRAK,(POLE)

The Magna-Trak 102’s LCD indicator offers a digital bar graph display, in addition to a standard audio tone, to precisely identify the target object, especially in noisy, congested areas.  When a magnetic disturbance, such as a metal fence, is confronted, simply press the "erase" button and the disturbance is erased for continued searching without interference. No need to reduce the sensitivity; the Magna-Trak 102 always returns to perfect magnetic balance when the "erase" button is pressed

Click Here for More Information

DETECTOR-METAL

  • AutoTrac® samples the ground and electronically resets for maximum depth and sensitivity.
  • Turn-on-and-go Simplicity. 2 controls-DISC and SENS.
  • Auto Trac® Toggle Beach, Auto and Off Mode.
  • Pinpoint/All Metal Mode Just squeeze and hold the trigger under the display to read the target depth and watch the pinpoint blocks to see when you are directly over the target.
  • High performance and easy to operate.

Click Here for More Information

DETECTOR-TRANSPOINTER,(4-FOOT)

Makes it easy to locate and measure exit holes in floors and walls up to 4 feet thick!

Click Here for More Information

DETHATCHER,(5HP)

Free-swinging flail blades efficiently remove matted thatch with centrifugal force. This design provides excellent thatch removal.

Click Here for More Information

DIAMOND-INSERT,PCD GRIT,(4)

These segments have a rough diamond grit for aggresive grinding of concrete, which is also good for removing mastic from ceramic tile, hard glue and resin on hard concrete surfaces.  It leaves a very rough surface good for the istallation of new ceramic tile, some epoxys and membranes.  This set of diamonds is used with our 10" grinder 110v item number 5870

 

Click Here for More Information

DIAMOND-INSERT,PCD PLATE,(4)

Good for the removal of elastic materials, glue and self levelers.  This set of diamonds is used with our 10" grinder 110v item number 5870

Click Here for More Information

DIAMOND-INSERT,PCD,GRIT,(6)

These segments have a rough diamond grit for aggresive grinding of concrete, which is also good for removing mastic from ceramic tile, hard glue and resin on hard concrete surfaces.  It leaves a very rough surface good for the istallation of new ceramic tile, some epoxys and membranes.  This set of diamonds is used with our 18" grinder 220v item number 5880.

 

Click Here for More Information

DIAMOND-INSERT,PCD,PLATES,(6)

Good for the removal of elastic materials, glue and self levelers.  This set of diamonds is used with our 10" grinder 110v item number 5870

Click Here for More Information

DIAMOND-INSERT,VS-1 BLUE,(4)

Grinding of epoxy or polyurethane coatings, also ideal for regular grinding with a semi smooth finish. This set of diamonds is used with our 10" grinder 110v item number 5870

 

Click Here for More Information

DIAMOND-INSERT,VS-1 BLUE,(6)

Grinding of epoxy or polyurethane coatings, also ideal for regular grinding with a semi smooth finish. This set of diamonds is used with our 10" grinder 110v item number 5870

Click Here for More Information

DOLLY-APPLIANCE

  • Capacity 700 lbs
  • Goes up and down stairs with ease
  • Portable, sturdy, lightweight steel, solid-weld construction throughout
  • Replaceable non-marring bumpers, ratchet system and stair rollers

 

Click Here for More Information

DOLLY-APPLIANCE,(W/WHEELS)

  • Capacity 800 lbs.
  • Swing-Out Retractable Wheels
  • Geared Ratchet Strap Tightener
  • Big 8" Semi-Pneumatic Wheels
  • One-Piece Toeplate
  • Full-Frame.

Click Here for More Information

DOLLY-DRYWALL

The Drywall Cart is designed to haul full capacity loads with easy maneuverability and complete stability

Click Here for More Information

DOLLY-FREIGHT

Extra-long 12" cast magnesium nose, with steel wear buttons, answers the need for truck to handle bulky cartons. Includes straight cross pieces, and interlocking side rails. 8" moldon rubber tired ball bearing wheels

  • Overall Height:                          48"
  • Overall Width: (8" Wheels)     18"
  • Width at Nose:                          14"
  • Depth at Nose:                         12"
  • Weight:                            22 lbs

Click Here for More Information

DOLLY-FREIGHT/CONVERTIBLE

Sturdy lightweight aluminum frame
3 frame cross braces
18" wide noseplate for large loads
Extra strength noseplate cast from special aluminum
10" full pneumatic wheels
Non-marking 5" x 1.25" swivel casters
Foot pedal release allows easy conversion from two-wheel to four-wheel position

Click Here for More Information

DOLLY-HYD.(ROL-A-LIFT)

Rol A Lift is the practical method of moving bulky and hard-to-handle loads.

Rol A Lifts are ideal for handling large, awkward objects or heavy equipment that is difficult to maneuver or position, like refrigerator cases, safes, or machines.
 
Yet they are versatile enough to safely handle fragile, sensitive equipment, like glass crates, computers, electrical panels and switchgear

Click Here for More Information

DOLLY-TOW

KarKaddy3 will tow almost any vehicle without difficult, time consuming adjustments to axles or ramps. This means no bolts to tighten and no heavy components to reposition.

Click Here for More Information

DRILL--9LB.(HAMMER/ROTARY)

  • Drilling range: 3/16" - 1".
  • Optimum drilling range: 1/2" - 3/4".

Click Here for More Information

DRILL-3/8IN.(RIGHT ANGLE)

  • Compact right-angle design for easy access in tight places
  • Paddle switch is ideal for use in awkward positions and limited access areas
  • Shielded chuck protects user and improves grip in confined areas

Click Here for More Information

DRILL-CORE, (HAND/HELD)

  • Versatile, mobile and efficient
  • Cores quickly and neatly into reinforced concrete, natural stone, masonry and asphalt
  • Can be set up and operated easily by one individual
  • Water flow conveniently controlled on the side handle
  • 3-speed gearing for optimum coring performance for each diameter and material type

Click Here for More Information

DRILL-CORE,(LARGE)

  • Powerful, air-cooled drive unit with 3-speed gearing and convenient controls
  • Power control indicator for optimum performance
  • Quick-release motor mount for rapid assembly
  • Sturdy, versatile drill stands up to 45 degrees and folds for easy storage and transport
  • Drills up to 12" diameter hole

Click Here for More Information

DRILL-CORE,(W/VACUUM PUMP)

  • Versatile, mobile and efficient
  • Cores quickly and neatly into reinforced concrete, natural stone, masonry and asphalt
  • Can be set up and operated easily by one individual
  • Water flow conveniently controlled on the side handle
  • 3-speed gearing for optimum coring performance for each diameter and material type
  • Light wieght aluminum stand with vaccumm pump, no anchors needed for floor applications

 

Click Here for More Information

DRUM-(DE-HEADER)

Open any size and gauge steel drum quickly and easily allowing drum recycling without the risk of fire from cutting with a torch

Click Here for More Information

DUST COLLECTOR,(184CFM/110V)

Voltage
110 V
Motor
2 kW (2.72 hp)
Dimensions (H x L x W)
138 cm x 67 cm x 85 cm
(54 in x 26 in x 33 in)
Weight
65 kg (143 lbs)
Filter surface
1.95 sq m ( 20 sq ft)
Airflow
max. 8200 l/min (190 cfm / min)
Depression
max. 21500 Pa
Cleaning
Manual
Dust ports
70 mm (2.76 in)
Capacity dust container
60 l (15 gals)
Noise level
70 dB(A)

Click Here for More Information

DUST COLLECTOR,(290CFM/220V)

Voltage
220 V
Motor
3 kW (4 hp)
Dimensions (H x L x W)
158 cm x 67 cm x 85 cm
62 in x 26 in x 33 in
Weight
68 kg (150 lbs)
Filter surface
1.95 sq m ( 20 sq ft)
Airflow
max. 8200 l/min ( 290 cfm / min)
Depression
max. 21500 PA
Cleaning
Manual
Dust ports
70 mm (2.76 in)
Capacity dust container
100 l (26 gals)
Noise level
70 dB(A)

Click Here for More Information

EDGER-BED,(LANDSCAPE)

Create seamless edges for beds around the house, pool or trees in a fraction of the time it would take you to do by hand.

Click Here for More Information

EDGER-LAWN,(POLE)

You see it in the best of places. Crisp corners. Sleek lines and contours. Walkways and curbs that stand out because of the sharp borders beside them.

Click Here for More Information

EXCAVATOR-#300.9/CAT, (5FT)

Digging Depth 4 ft. 11 in.
Backhoe Bucket Size 12 in.
Backhoe Lift Capacity 476 lbs.
Overall Width 28 in.
Power Rating 8.7 hp.
Fuel Type Diesel
Tracks Rubber
Weight 1,985 lbs.

 

Click Here for More Information

EXCAVATOR-#301.7/CAT, (8FT)

Digging Depth 7 ft. 1 in.
Backhoe Bucket Size 16 in.
Backhoe Lift Capacity 982 lbs.
Overall Width 39 in.
Power Rating 15 hp.
Fuel Type Diesel
Tracks Rubber
Weight 4,090 lbs.

Click Here for More Information

EXCAVATOR-#303.5/CAT,(10FT)

Digging Depth 10 ft. 5 in.
Backhoe Bucket Size 20 in. 
Backhoe Lift Capacity 2,474 lbs.
Overall Width 5 ft. 9 in.
Power Rating 29 hp.
Fuel Type Diesel
Tracks Rubber
Weight 8,245 lbs.

Click Here for More Information

EXCAVATOR-#305/CAT,(12FT)

Digging Depth 12 ft. 6 in.
Backhoe Bucket Size 24 in.
Backhoe Lift Capacity 3,334 lbs.
Overall Width 6 ft. 5 in.
Power Rating 39 hp.
Fuel Type Diesel
Tracks Rubber
Weight 11,110 lbs.

Click Here for More Information

EXCAVATOR-#308/CAT,(16FT)

Digging Depth 16 ft.
Backhoe Bucket Size 36 in. Tooth Bucket
48 in. Ditching Bucket
Backhoe Lift Capacity 4,151 lbs.
Overall Width 7 ft. 9 in.
Power Rating 54 hp.
Fuel Type Diesel
Tracks Rubber Pad
Weight 18,490 lbs.

Click Here for More Information

FENCE-TEMPORARY,(8 X 6 PANELS)

Temporary Fence is the perfect solution for Jobs Sites, Festivals, Public Events or any Large Gatherings. It limits the risk of theft and vandalism while influencing positive traffic flows. Our aesthetic fence stands 6’ tall and is practically impossible to climb.

Click Here for More Information

FLOOR MAINTAINER,(13IN)

  • Screening floors after sanding
  • Screen & recoating polyurethane floors
  • Waxed floors scrubbing & polishing
  • Tile Maintenance

Click Here for More Information

FLOOR MAINTAINER,(18IN)

  • Screening floors after sanding
  • Screen & recoating polyurethane floors
  • Waxed floors scrubbing & polishing
  • Tile Maintenance

 

Click Here for More Information

FLOOR MAINTAINER,(20IN)

With its hi-speed rotation combined with hi-speed pads, and floor finishes a burnisher creates heat that burnishes a glossy finish on the floor.

 

Click Here for More Information

FORK-PALLET,(DINGO)

This versatile attachment can be used for a variety of material handling jobs to move posts, rocks, trees, pallets, etc.

Click Here for More Information

FORKLIFT, (5500LB-19FT)

Maximum Lift Height              19 ft

Maximum Forward Reach      11 ft

Maximum Lift Capacity           5,500 lbs

Travel Speed                          15 mph

Weight                                    9,800 lbs

 

Click Here for More Information

FORKLIFT, (6000LB-42FT)

Maximum Lift Height
     42 ft
Maximum Forward Reach
     26’ 4 in
Maximum Lift Capacity
     6,700 lbs
Max Travel Speed
     17.1 mph
Operating Weight
     19,677 lb

Click Here for More Information

FORKLIFT, (8000LB-44FT)

 

Maximum Lift Height               44 ft 
Maximum Forward Reach      27 ft
Maximum Lift Capacity            8,000 lbs
Travel Speed                            17 mph
Weight*                                      22,500 lbs

 

Click Here for More Information

FORKLIFT,(10,000LB-56FT)

 

Maximum Lift Height                56 ft 10 in
Maximum Forward Reach      42 ft
Maximum Lift Capacity            10,000 lbs
Travel Speed                             17 mph
Weight*                                       30,000 lbs

Click Here for More Information

FREEZER-PIPE,(1/2IN-21/2IN)

The SuperFreeze Pipe Freezer is an easy-to-use pipe freezing unit that allows the contractor to keep water systems operating while making repairs. The RIDGID SF-2500 is a mini-refrigeration unit that circulates self-contained refrigerant to its aluminum freeze heads. This forms an ice plug in as little as 5 minutes in copper tube up to 21/2" or steel pipe up to 2". Once the pipe is plugged, repairs can be made with no fear of the ice plug melting because the unit remains on!

Click Here for More Information

GENERATOR---(2,000 WATT)

Engine

Honda GX 100

Displacement

98.5cc

AC Output

120V 2000W max (16.7A) 1600W rated (13.3A)

Receptacles

20A 125V Duplex

DC Output

12V, 96W (8A)

Starting System

Recoil

Fuel Tank Capacity

.95 gal

Run Time per Tankful

3.4hr @rated load 8.1 hrs. @1/4 load

Dimensions (LxWxH)

20.2” x 11.4” x 16.7”

Noise Level

59 dB(A) @ rated load 53dB(A) @ ¼ load

Dry Weight

45.6 lb.

Click Here for More Information

GENERATOR---(3,000 WATT)

Engine

Honda GX200

Displacement

196cc

AC Output

120V 3000W max. (25.0A) / 2600W rated (21.7A)

Receptacles

20A GFCI 125v Duplex, 30A 125V Locking Plug

DC Output

N/A

Starting System

Recoil

Fuel Tank Capacity

2.6 gal.

Run Time per Tankful

6.1 hrs @rated load, 9.39 hrs @ ½ load

Dimensions (L x W x H)

17.5” x 15.8” x 18.9”

Noise Level

68 dB @ rated load

Dry Weight

71 lbs.

Click Here for More Information

GENERATOR---(4,000 WATT)

 

Engine

Honda iGX270

Displacement

270cc

AC Output

120/240V 4000W max. (33.3/16.7A) 3500W rated (29.2/14.6A)

iAVR Output

5000w (41.7/20.8 A) for 10 sec.

Receptacles

20A 125 V Duplex (2), 30A 125V Locking Plug, 20A 125/250V Locking Plug

DC Output

N/A

Starting System

Recoil

Fuel Tank Capacity

6.2 gal.

Run Time per Tankful

10.1 hrs.@ rated load, 16 hrs. @ 1/2 load

Dimensions (L x W x H)

41.1” x 27.8” x 30.4”

Noise Level

71 dB(A) @ Rated Load

Dry Weight

188 lbs.

Click Here for More Information

GENERATOR---(6,500 WATT)

 

Engine

Honda iGX390

Displacement

389cc

AC Output

120/240V 6500W max. (54.1/27.1A) / 5500W rated (45.8/22.9A)

iAVR Output

7000w (58.3/29.2A) for 10 sec.

Receptacles

20A 125V Duplex (2), 30A 125V Locking Plug, 30A 125/250V Locking Plug

DC Output

N/A

Starting System

Recoil

Fuel Tank Capacity

6.2 gal.

Run Time per Tankful

6.9 hrs. @ rated load, 10.4 hrs @ ½ load

Dimensions (L x W x H)

41.1” x 27.8” x 30.4”

Noise Level

75 dB(A) @ rated load

Dry Weight

222 lbs.

Click Here for More Information

GRAPPLE-ROOT, (MINI-42IN)

 Mini Skid Steer Root Grapple Attachment 44" Wide Professional Series

Click Here for More Information

GRAPPLE-ROOT, (STD.-72IN)

Load or pile logs, brush, rocks, and many other materials. Ideal for separating dirt from rock, lumber, or building materials with ease.

Click Here for More Information

GRINDER,(4-1/2IN)

  • Features: 10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protection
  • Quick-change wheel release provides easier and quicker wheel removal without the need for a wrench
  • Keyless adjustable guard provides tool free guard adjustment thus increasing productivity
  • Vibration reducing removable side handle provides user comfort and reduces user felt vibration
  • Paddle switch lock-off provides the user protection from accidental start up

 

Click Here for More Information

GRINDER---(7-9IN)

  • High power 4 HP (maximum motor HP) 6,000 rpm motor with overload protection provides higher operating speeds under load
  • 3 position side handle provides improved ergonomics for specific applications
  • 6,000 rpm is a midrange speed for use with multiple accessories
  • 3 wire grounded ’S’ jacket rubber cord provides increased durability and life in hot and cold climates
  • Lightweight increases productivity in extended use applications

 

Click Here for More Information

GRINDER-CONCRETE,(10IN/110V)

Additional items must be rented with this item. Please refer to related rental items on next page

Powered by only 110 V single phase our grinder reaches the class of 3 phase machines, while weighing in at only 93 lbs!  

  • Dust free due to an integrated dust port
  • Removable dust shroud. Grinds up to the wall
  • Replaceable diamond segments
  • Handle folds within seconds, ensuring ease of transportability
  • Flexible drive coupling
  • Wide variety of tooling available for paint, concrete and coating removals

 

Click Here for More Information

GRINDER-STUMP, (13HP) MANUAL

Cutter Wheel w/ Teeth 14 in. x 3/8 in.
Cutting Depth 13 in.
Cutting Height 22 in.
Ground Drive Push Type
Power Rating 13 hp.
Fuel Type Gasoline
Length 90 in.
Width 31 in.
Weight 420 lbs.

Click Here for More Information

GRINDER-STUMP,(25HP) HYDRAULIC

Cutter Wheel w/ Teeth 19 in. x 1/2 in.
Cutting Depth 13 in.
Cutting Height 25 in.
Ground Drive Self-Propelled Hydraulic
Power Rating 25 hp.
Fuel Type Gasoline
Length 115 in.
Width w/ Single Wheels 35 in.
Width w/ Dual Wheels 50 in.
Trailer Hitch 2 in. Ball or Pintle Ring
Weight 1,060 lbs.

Click Here for More Information

GRINDER-STUMP,(55HP) HYDRAULIC

 

As stump cutters go, the SC652 is small in stature but big on performance.

It goes where tow-behind machines can’t and makes short work of stumps

when it gets there.

Cutter Wheel w/ Teeth 26 in. x 1.13 in.
Cutting Depth 24 in.
Cutting Height 24 in.
Ground Drive Self Propelled
Power Rating 65 hp.
Fuel Type Diesel 3.8 gph
Length 12 ft. 3 in.
Width 35 in.
Height 76.5 in.
Weight 3,900 lbs.

Click Here for More Information

HAMMER-20LB.(HILTI-TE70-ATC)

  • Low vibration for increased user comfort and productivity
  • Hammering regulation from 100 to 50 power for better control in fragile materials
  • Use as a chipping hammer or a hammer drill
  • Optimal drilling size from 1/2 inch to 6 inch diameter holes
  • Optimized mechanical clutch for maximum torque
  • Tool with ATC does not twist if drill bit catches, which minimizes  accident risks

 

Click Here for More Information

HAMMER-30LB.(HILTI-TE1000)

 - 16 ft-lbs of impact energy delivers outstanding demolition performance and productivity
- Sub-chassis Active Vibration Reduction achieves the lowest vibration in its class
- Power Reduction Switch offers 30% less impact for precision work

- Light to medium demolition of concrete slabs and foundations
- Concrete removal for rebar and utility connections
- Concrete bushing, tamping earthwork and digging in clay
- Penetrations for pipes, electrical boxes, HVAC, beams, etc.
- Heavy floor tile removal

Click Here for More Information

HAMMER-70LB, (HILTI -TE3000)

 

Technical Data TE 3000-AVR
Power input                           1800 W
Voltage                                    120 V
Hammering frequency         840 bpm
Single impact energy           50 ft-lbs
Weight                                     66 lbs
Dimensions (L x W x H)        32 x 24 x 8 in

Click Here for More Information

HAMMER-70LB.(ELECTRIC)

  • 61 Ft-lbs impact energy provides maximum performance
  • SHOCKS - Active Vibration Control reduces user fatigue and increases comfort and productivity
  • 15 amp motor provides maximum power and overload protection
  • Rubber coated handles provide greater comfort and control
  • Electronic soft start increases productivity by reducing bit walking

 

Click Here for More Information

HAMMER-ATTACHMENT, (250LB)

Impact Energy 250 lbs.
Weight 203 lbs.
Length 40 in.
BPM 900
GPM 4-8
Steel Diameter 1.77 in.
Steel Length 11.42 in.

Click Here for More Information

HAMMER-ATTACHMENT, (500LB)

Impact Energy 500 lbs.
Weight 445 lbs.
Length 56.75 in.
BPM 1,000
GPM 8.5-13
Steel Diameter 2.38 in.
Steel Length 13.8 in.

Click Here for More Information

HOIST-ENGINE

Backyard shop, warehouse, or construction site, the Kaydee knockdown lift goes wherever the job is. The boom hook rotates 360 degrees, making it easy to pick up, load and reposition objects

Click Here for More Information

HOIST-GANTRY,(2-TON)

Lightweight and easily portable, SPANCO Gantry Cranes are made from aluminum and are easy to assemble or disassemble. Popular for HVAC work or on service trucks, SPANCO Gantry Cranes will not weigh down workers on the job who need to maneuver stairways or access roofs. Because aluminum is also corrosion resistant, SPANCO Gantry Cranes are well suited for use in refrigeration areas, clean rooms and other controlled environments.

Click Here for More Information

HOIST-TRIPOD,(9FT.-RESCUE)

tripod includes winch with 60' stainless steel cable, harness is sold separately.

Click Here for More Information

LEVEL-LASER,(EXTERIOR)

The Spectra Precision® Laser LL500 Laser Level is a one-person leveling system designed for longer range measurements across your entire site. Accurate, stable and reliable, the LL500 features a 1,600 ft (500 m) working diameter which increases productivity by reducing the need for multiple setups on a large job site.

Click Here for More Information

LEVEL-LASER,(INTERIOR)

  • Interior and exterior commercial and residential construction
  • Leveling and aligning
  • Interior wall layout
  • Installation of ceilings and raised floors
  • Interior finishing work

Click Here for More Information

LIFT-40FT/BUCKET,(TOWABLE)

Working Height 48 ft.
Platform Height 42 ft.
Horizontal Reach 21 ft.
Outrigger Footprint 10.5 ft. x 10.5 ft.
Lift Capacity 500 lbs.
Power Battery
Trailer Hitch 2 in. Ball
Weight 3,800 lbs

Click Here for More Information

LIFT-DRYWALL,(10FT)

The Drywall Lift holds 4’ x 12’ sheets of drywall, and knock down for easy storage and handling. The winch designs use a steering wheel for easy adjustment.

Click Here for More Information

LIFT-MATERIAL,(350LBS/10FT)

GL™-10

• 11 ft 8 in (3.56 m) maximum lift height
• Up to 350 lb (159 kg) load capacity
PRODUCTIVITY
• Portable and compact design
• Lightweight durable aluminum
construction
• Single door access
• Durable standard steel forks
• 8 in (20 cm) non-marking rear wheels
and 2 in (5 cm) dual wheel front
swivel casters (standard and straddle
base only)
• 5 in (12 cm) rear swivel casters with
side brakes and 4 in (10 cm) fixed front
wheels (counterweight base only)
• Loads easily into a pickup truck
for transporting
• Hold-down mechanism secures
carriage during transport

Click Here for More Information

LIFT-MATERIAL,(650LBS/18FT)

SLC™-18

• 18 ft 6 in (5.64 m) maximum
working height
PRODUCTIVITY
• Standard forks
• Heavy-duty design
• Strong, lightweight aluminum
telescoping mast
• Single door access
• Quick set up requires no tools
• Non-marking 4 in (10 cm) front
casters and 5 in (13 cm) rear casters
with side brakes
• Rear transport wheel assembly
• Glide rails allow easy loading and
unloading, on or off a vehicle, for
transport
• Hold-down bar secures mast assembly
during transport

 

Click Here for More Information

LIFT-MATERIAL,(650LBS/24FT)

SLC™-24

• 24 ft (7.32 m) maximum working height
• Up to 650 lb (295 kg) lift capacity
PRODUCTIVITY
• Standard forks
• Heavy-duty design
• Strong, lightweight aluminum
telescoping mast
• Single door access
• Quick set up requires no tools
• Non-marking 4 in (10 cm) front
casters and 5 in (13 cm) rear casters
with side brakes
• Rear transport wheel assembly
• Glide rails allow easy loading and
unloading, on or off a vehicle, for
transport
• Hold-down bar secures mast assembly
during transport

Click Here for More Information

LIFT-PLATFORM,(1-MAN)

Working Height 35 ft. 6 in.
Platform Height 29 ft. 6 in.
Stowed Height 6 ft. 6 in.
Stowed Width 29 in.
Outrigger Footprint 6 ft. x 6 ft.
Power Battery
Weight 867 lbs.

Click Here for More Information

LIFT-PLATFORM,(12FT/29IN)1600#

Working Height 17 ft. 5 in.
Platform Height 11 ft. 5 in.
Stowed Height 5 ft. 2 in.
Width 2 ft. 5.5 in.
Lift Capacity 500 lbs.
Power Battery
Weight 1,581 lbs.

Click Here for More Information

LIFT-PLATFORM,(19FT/32IN)

Working Height 25 ft.
Platform Height 19 ft.
Stowed Height 64.5 in. with rails removed
Width 32 in.
Lift Capacity 550 lbs.
Power Battery
Weight 2,580 lbs.

Click Here for More Information

LIFT-PLATFORM,(20FT/29IN)2450#

Working Height 25 ft. 9 in.
Platform Height 19 ft. 9 in.
Stowed Height 6 ft. 6 in.
Width 2 ft. 7.5 in.
Lift Capacity 350 lbs.
Power Battery
Weight 2,450 lbs.

Click Here for More Information

LIFT-PLATFORM,(26FT/32IN)NARROW

Working Height 32 ft.
Platform Height 26 ft.
Stowed Height 70.6 in.
Width 32 in.
Lift Capacity 500 lbs.
Power Battery
Weight 4,135 lbs.

Click Here for More Information

LIFT-PLATFORM,(26FT/46IN)WIDE

Working Height 32 ft.
Platform Height 26 ft.
Stowed Height 70.5 in.
Width 46 in.
Lift Capacity 1,000 lbs.
Power Battery
Weight 4,700 lbs.

Click Here for More Information

LIFT-PLATFORM,(26FT/68IN)4WD

Working Height 32 ft.
Platform Height 26 ft.
Stowed Height 63.5 in.
Width 69.5 in.
Lift Capacity 1,250 lbs.
Ground Drive 4-Wheel Drive
Fuel Type Diesel
Weight 6,400 lbs.

Click Here for More Information

LIFT-PLATFORM,(32FT/46IN)

Working Height 38 ft.
Platform Height 32 ft.
Stowed Height 74 in.
Width 46 in.
Lift Capacity 700 lbs.
Power Battery
Weight 5,075 lbs.

Click Here for More Information

LIFT-PLATFORM,(32FT/68IN)4WD

 

Working Height 38 ft.
Platform Height 32 ft.
Stowed Height 69 in.
Width 69.5 in.
Lift Capacity 1,000 lbs.
Ground Drive 4-Wheel Drive
Fuel Type Diesel
Weight 7,660 lbs.

Click Here for More Information

LIFT-PLATFORM,(41FT/88IN)4WD

Working Height 47 ft.
Platform Height 41 ft.
Stowed Height 87.5 in.
Width 87 in.
Lift Capacity 1,500 lbs.
Ground Drive 4-Wheel Drive
Fuel Type Diesel
Weight 10,800 lbs.

Click Here for More Information

LIFT-STRAIGHT, (125FT W/4WD)

Working Height 131 ft.
Platform Height 125 ft.
Horizontal Reach 80 ft.
Width 11 ft. 1 in.
Lift Capacity 500 lbs.
Ground Drive 4-Wheel Drive
Power Rating 74 hp.
Fuel Type Diesel
Weight 44,640 lbs.

Click Here for More Information

LIFT-STRAIGHT, (45FT W/4WD)

Working Height 51 ft.
Platform Height 45 ft.
Horizontal Reach 36 ft. 8 in.
Width 7 ft. 6 in.
Lift Capacity 500 lbs.
Ground Drive 4-Wheel Drive
Power Rating 46 hp.
Fuel Type Diesel
Weight 14,790 lbs.

Click Here for More Information

LIFT-STRAIGHT, (65FT W/4WD)

Working Height 71 ft.
Platform Height 65 ft.
Horizontal Reach 56 ft. 2 in.
Width 8 ft. 2 in.
Lift Capacity 500 lbs.
Ground Drive 4-Wheel Drive
Power Rating 46 hp.
Fuel Type Diesel
Weight 24,270 lbs.

Click Here for More Information

LIFT-STRAIGHT, (85FT W/4WD)

Working Height
91 ft.
Platform Height
85 ft.
Horizontal Reach
76 ft. 6 in.
Width
8 ft. 2 in.
Lift Capacity
500 lbs.
Ground Drive
4-Wheel Drive
Power Rating
63 hp.
Fuel Type
Diesel
Weight
38,000 lbs

Click Here for More Information

LIFT-UP & OVER,(45FT W/4WD)

 

Working Height 51 ft.
Platform Height 45 ft.
Horizontal Reach 25 ft.
Width 7 ft. 6 in.
Lift Capacity 500 lbs.
Ground Drive 4-Wheel Drive
Power Rating 46 hp.
Fuel Type Diesel
Weight 13,875 lbs.

Click Here for More Information

LIFT-UP & OVER,(62FT W/4WD)

Working Height 67 ft. 11 in.
Platform Height 61 ft. 11 in.
Horizontal Reach 40 ft. 5 in.
Width 8 ft. 2 in.
Lift Capacity 500 lbs.
Ground Drive 4-Wheel Drive
Power Rating 49 hp.
Fuel Type Diesel
Weight 22,155 lbs.

Click Here for More Information

LIFT-UP & OVER,(62FT.SPIDER-TRACK)

Working Height 62 ft.
Platform Height 56 ft.
Horizontal Reach 32 ft.
Width, Stowed 2 ft. 7 in./ 3 ft.6 in.
Outrigger Footprint 9ft. 6in. X 9ft. 8in.
Lift Capacity 440 lbs.
Ground Drive Non-Marking Rubber Tracks
Fuel Type Electric or Gas
Weight 5,100 lbs.

Click Here for More Information

LIFT-UP & OVER,(80FT W/4WD)

Working Height 84 ft.
Platform Height 78 ft.
Horizontal Reach 60 ft.
Width 8 ft. 2 in.
Lift Capacity 500 lbs.
Ground Drive 4-Wheel Drive
Power Rating 74 hp.
Fuel Type Diesel
Weight 35,900 lbs.

Click Here for More Information

LIFT-UP & OVER,(Z-40N ELECTRIC)

Working Height 46 ft. 5 in.
Platform Height 40 ft. 5 in.
Stowed Height 6 ft. 6 in.
Width 4 ft. 11 in.
Lift Capacity 500 lbs.
Power Battery
Weight 15,230 lbs.

 

Click Here for More Information

LOADER-MINI TRACK, (CTX50)

Length with Standard Bucket

95”

Length without Standard Bucket

75”

Width with a Standard Bucket

42”

Height

54.5”

Height to hinge pin

72”

Ground Clearance

6”

Weight Standard Bucket Gas Engine

2245 lbs

 

Click Here for More Information

LOADER-SKID STEER, (S650)

The Bobcat® S650 skid steer loader is part of the M-Series. With its vertical lift path, the S650 gives you increase lifting capacity and provides greater forward reach at full lift height for loading over dump trucks. Like all M-Series models, the S650 has an industry-leading cab design that offers improved visibility and operator-friendly features such as cab forward design with the optional pressurized cab, air ride seats and seat-mounted joysticks. The S650 has powerful hydraulics, top digging and pushing power, and increased fuel capacity. Stay productive with simple maintenance checks and simple design. To help you become even more productive, Bobcat offers more attachments for more carriers than anyone in the industry. Bobcat is the only major compact equipment company that manufactures a majority of its attachments

Click Here for More Information

LOADER-SKID STEER,(S70)

The compact Bobcat S70 skid-steer loader is small enough to get in the tight spots, yet tough enough to get you out. This agile little workhorse is only 6 feet tall and 36 inches wide, it’s the perfect loader whenever the job is too big for a shovel or the space is too small for a larger machine.

The only attachments available for this loader is a smooth or a tooth bucket.

Click Here for More Information

LOCATOR-SEETECH SR-60

SeeTech SR-60 can Locate:

  • SeeSnake In-Line Transmitters.
  • Remote Transmitters (Sondes).
  • Energized Metallic Lines.
  • Energized Electical Lines
  • Approach the transmitter from any direction for faster, more accurate locates.
  • Verify the locate using the large mapping display.
  • Depths of greater than 15’ can be read.

Click Here for More Information

MIXER-CONCRETE,(9CU.FT)GAS

Large Heavy Duty Side Dump. A generous 9 cu. ft. capacity for large batches

Click Here for More Information

MIXER-MORTAR,(7CU.FT)GAS

Deluxe Mid Range
8 cu. ft., 2-1/2 to 3 bag capacity - HIGH DUMP MIXER

Click Here for More Information

MONITOR-DIGITAL CS-10

  • 12" color monitor with sunshield.
  • USB Flash Drive 
  • Hands-free audio recording.
     

Click Here for More Information

MOWER-BOBCAT,(60IN./BUSHOG)

The bushog mulches small bushes and sapplings, up to 3" in diameter, and cuts through the thickest grass and brush. The bushog is ideal for clearing undeveloped property, construction sites, trails, ditches and more.

Click Here for More Information

MOWER-BRUSH CUTTER, (26IN.)

The new Outback® BC26 commercial-duty walk-behind brushcutter is ideal for clearing overgrown meadows. The 26" wide rigid deck provides excellent stability in deep vegetation and cleans up brush at 2/3 acre per hour! 

Click Here for More Information

MOWER-DINGO,(42IN./BUSHOG)

Hydraulic mower attachment for the dingo walk behind loader. The mower is capable of cutting up to 2" sapplings.

Click Here for More Information

NAILER-T&G,(3/4IN.AIR)

  • High-speed mallet actuated pneumatic operation increases productivity over manual methods
  • Extra-wide composite base plate for added stability
  • Long reach handle for improved comfort and control

Click Here for More Information

PLANE-CONCRETE,(8IN)

  • 8" working width will scarify approximately 350-500 sq. ft. per hour at Depth Per Pass of 1/8"
  • Removes traffic lines at 800-1,000 lineal ft. per hour
  • Sidewalk trip hazard repair
  • Concrete and coatings removal
  • Floor cleaning and/or preparations
  • Creating non-slip surfaces
  • Traffic line and markings removal

 

Click Here for More Information

PLANE-DOOR,(ELECTRIC)

  • Heavy-duty 7.0 Amp motor provides a smooth, even finish in the hardest of woods
  • 3/32" (2.5mm) maximum cut in one pass reduces the amount of passes on your material
  • Calibrated Depth Adjustment Knob for accurate depth setting and eliminating the need to re-zero your depth

 

Click Here for More Information

PLUG-SET,(GREENLEE)

Use with PVC Heating Blankets or Electric Heaters to plug the ends of the PVC being heated.
  • The trapped air will help keep the PVC from collapsing while forming the bend.
  • Use on Schedule 40 and 80 PVC.
  • Available in 2" - 4" set

Click Here for More Information

POSTHOLE DIGGER,(1-MAN/HYD)TOW

  • Variable speed, Forward and Reverse auger rotation
  • Three handlebar positions; two for normal drilling and one for close up drilling and towing
  • Drilling head pivots from side to side for drilling on uneven terrain
  • No torque to the operator
  • Engine frame swivels to keep engine level for optimum performance
  • Auger locks up out of the way for easy maneuvering
  • Includes tow bar with 2” hitch coupler
  • 7/8” square auger drive fits all Ground Hog augers up to 18"
  • 9hp Honda engine
  • 275 ft. lbs. of torque and 140 rpm approx. max. auger speed

Click Here for More Information

POSTHOLE-ATTACHMENT,(BOBCAT)

Maximum auger diameter 36" Available 8", 12", 18", 24", 30", and 36" augers. Reverse rotation for quick backout when obstructions are encountered

Click Here for More Information

POSTHOLE-ATTACHMENT,(DINGO)

The high torque (power) translates into the Dingo’s capability to dig 30" holes up to 5’ deep in clay, gravel, sandstone and many other soil conditions.

Click Here for More Information

PROJECTOR-MULTIMEDIA

  • Offers brightness of 3000 ANSI lumens
  • 2100:1 (full on/full off) contrast ratio delivers excellent video images
  • Eco-mode to extend lamp life and for quieter operation
  • Integrated zoom lens and automatic vertical keystone correction
  • Full connectivity — Supports PC, S-video, composite video, component video via VGA and RS-232 connectors
  • Supports full range of television and video standards, including NTSC, NTSC 4.43, PAL, PAL-N, PAL M, SECAM and HDTV (480i/P; 576i/P, 720P; 1080i)
  • Includes cables, remote control and a drop-tested hard carrying case

Click Here for More Information

PRUNER-TREE,(2/CYCLE)

Cutting and trimming tall branches can be a difficult chore, if you don’t have the right tool. For times when a chain saw can’t be safely used,  pole pruners are ideal for quickly and easily cutting those out-of-reach branches. 

Click Here for More Information

PUMP-3/4

PUMP-3/4(POOL COVER)-ELECTRIC

Click Here for More Information

PUMP-3/4

PUMP-3/4(SUBMERSIBLE)-ELEC.

Click Here for More Information

PURIFIER-AIR

Designed for hotels, hospitals, and homes 0 - 1000 mg/hr output 0.55 amps at maximum output 1 hour timer 30000 cu ft treatable area 115 CFM air movement 6' removable power cord 14 lbs. 12"x7"x9" (LxHxW) lightweight

Click Here for More Information

RAKE-HARLEY,------(BOBCAT)

This skid steer attachment is good for tearing out old sod, grading topsoil pulverizing dirt clumps, preparing seed/sod beds.

Click Here for More Information

ROLLER-PUSH,(250LBS)

  • 18" diameter x 24" wide.
  • Poly construction for rustproof durability
  • drum capacity...250lbs (water)
  • Lightweight when empty, for easy transporting and storage.

Click Here for More Information

ROPE-CABLE PULLER,(600FT)

Double-Braided Composite rope 7/8 in. X 600 ft.

Click Here for More Information

SANDER-DISC,(DRYWALL)

Using the Porter Cable 7800 Drywall Sander you will finish walls and ceilings 3 to 4 times faster than with conventional methods. Clean up is minimized when used with a vacuum attached to the tool, and finish is superior to other finishing methods. Operator can sand 10' ceilings without using stilts or a scaffold.

Note: Does not include vacuum.

Click Here for More Information

SANDER-EDGER

  • Sands wood floors right up to the baseboard
  • Precision balanced sanding pad, swivel dust bag support reduces bag wear
  • 600 cu in capacity, fine filter dust bag
  • Non-marking roller guard
  • Uses exclusive hook and loop sanding pad and sand paper

Click Here for More Information

SANDER-FLOOR

  • Removes imperfections and old finishes to prepare for varnishing and polishing
  • Available with exclusive hook and loop drum for no-tool paper changes
  • Secured belt-guard, easy tilt wheels to engage with the floor

Click Here for More Information

SANDER-OSCILLATING,(PALM)

 

Accepts 5", 8-hole hook & loop paper allows sanding discs to be switched back and forth quickly and easily

Click Here for More Information

SANDER-RADIATOR

  • Sands wood floors right up to base board underneath radiators
  • Sands underneath railings on decks or porches
  • Available with exclusive hook and loop sanding pads and paper

Click Here for More Information

SAW-BRICK/BLOCK,(14IN)DUSTLESS

 

Voltage

120V

Amperage

15A

Weight

65 lbs.

Dimensions

17”w x 20”L x 30”h

Blade Size

14 in.

Spindle Size

1 in.

Filter Type

Cartridge

Dust Capacity

50 Lbs.

Click Here for More Information

SAW-BRICK/BLOCK,(14IN)GAS

•Rolling table will accomodate 16" blocks
•Portable model with 14” blade capacity
•Rounded blade guard with splash proof protection
•Universal cutting table with water drain holes and centered wood block eliminates cutting through tables
•Side-Mounted handles for balanced lifting load
•Vacuum hookup optional for dust-free cutting
•1/4" steel arbor wrench with saw-mounted wrench holder
•Adjustable cutting head can be used manually or locked in a fixed position
•Quick adjusting heavy-duty bearing assemblies for easy blade alignment
•Choose between optional folding upright stand or expandable ProCart for convenient working height

 

Click Here for More Information

SAW-CHOP,(14IN)

SAW-CHOP,(14IN)

Note: Does not include diamond blade ask store for details

Click Here for More Information

SAW-CONCRETE,(14IN/18IN)

  • Short-run slab cutting
  • Contraction joints
  • Patch repairs in asphalt
  • Traffic loop installation and trenching
  • Note: Does not include diamond blade ask store for details.

Click Here for More Information

SAW-CONCRETE,(20-36IN.-DIESEL)

 

Engine

Kubota Diesel V1505-T-E3B

Horse Power

44 hp.

Gear Box

Three Speed

Arbor

1” with 3/8 “ Drive Pin

Depth of Cut - 20 “ Blade

7-1/2 in.

Depth of Cut - 26” Blade

10-1/2 in.

Depth of Cut - 30” Blade

12-1/2 in.

Depth of Cut - 36” blade

15 in.

Blade Shaft RPM

1300/2000/3000

Fuel Capacity

6 Gallons

Travel Speed

0-220 FPM Forward

0-100 FPM Reverse

L x W x H

64 in. x 35 in. x 47 in.

Weight

1080 lbs.

Click Here for More Information

SAW-CONCRETE,(24IN/GAS)

SAW-CONCRETE,(24IN)

Note: Does not include diamond blade ask store for details

Click Here for More Information

SAW-CONCRETE,(AIR)-16IN

SAW-CONCRETE,(AIR)-16IN

Note: Does not include diamond blade ask store for details

Click Here for More Information

SAW-CUT/OFF,(14IN.BLADE)

SAW-CUT/OFF,(14IN.BLADE)

Note: Does not include diamond blade ask store for details

Click Here for More Information

SAW-CUT/OFF,(ELECTRIC)-16IN

Power

Electric

Voltage

120 Volt

Amps

20A

RPM – With Load

1760 RPM

RPM Without Load

2690 RPM

Max Depth

6 in.

Weight

15 lbs.

Click Here for More Information

SAW-JAMB

  • Cuts flush to floor to underlay vinyl along walls
  • Cuts high enough to fit in ¾” wood floors
  • Fully undercuts inside corner
  • Comes with carbide blade

Click Here for More Information

SAW-KADDY, (HAND HELD ELECTRIC)

 Diamond blade not included please select from related items to add a blade

 

Click Here for More Information

SAW-TOE KICK

Cuts flush to the wall and to a maximum depth of ¾”for easy removal of underlayment

Click Here for More Information

SAWZALL-(ELECTRIC)

  • Keyless stainless steel blade clamp for quick and easy blade changes and increased reliability
  • Keyless adjustable shoe easily adjusts depth of cut and extends blade life
  • Variable speed control dial matches the correct speed for the application for increased versatility and control

Click Here for More Information

SCAFFOLD-UTILITY,(2.5FT X 6FT)

These units are easy to assemble, lightweight and are perfect for all types of interior work. They can even be used on stairs. This rental item includes, two (2) adjustable siderails, one (1) walkboard and four (4) wheels. Outriggers, levelers and guard rails are rented separately.

Dimensions: 6'L x 29"W x 6'H

Click Here for More Information

SCRUGUN-(ELECTRIC)

  • High torque for deck building, drywall and heavy gauge steel stud framing
  • Depth-sensitive, "set and forget" nosepiece for consistent fastener depth
  • Two-finger, rubber trigger for increased comfort

Click Here for More Information

SEEDER-HYDRO, (600GAL)

Hydroseeding is more efficient that sodding, broadcast seeding, or any other method of establishing turf or controlling erosion.

Click Here for More Information

SEEDER-SLIT,(20LB/HOPPER)

The S22 Seeder makes turf renovation simple and easy. The S22 is well balanced and portable thanks to the placement of the polymer seed hopper and its folding handle. The seed gate is also adjustable to accommodate a broad range of grass seed.

Click Here for More Information

SHEARS-SHEET METAL,(12GA)

Capacity (Mild Steel) 12 ga.
Capacity (Stainless Steel) 14 ga.
Cuts radius as small as 1" for various applications

Click Here for More Information

SHORING-TRENCH,(ALUMINUM)

Provides effective protection for contractors working in trench applications in a variety of soil conditions.

Click Here for More Information

SHORING-TRENCH,(STEEL)

Provides effective protection for contractors working in trench applications in a variety of soil conditions.

 

Click Here for More Information

SNAKE-DRILL,(25FT)

Used for clearing sink and tub drains

 

Click Here for More Information

SNAKE-ELECTRIC EEL

This is the best unit available for tougher blockages such as TREE ROOTS and for longer runs in main sewer lines.

Click Here for More Information

SNAKE-JETTER,(3000PSI/200FT)-G

Penetrates and cleans tough problems from pipe walls. Such as: Sludge, Grease, Sand, Soap, Dirt and Debris.

Click Here for More Information

SNAKE-SPOOL,(LARGE)100' X 5/8

The Easy Rooter is a tough, easy-to-use machine. Plated cage holds 100 ft. of 5/8" cable. The easy rooter clears the main sewer line of a home or business.

Click Here for More Information

SNAKE-SPOOL,(MEDIUM)75' X 1/2

The EasyRooter jr clears lines from rooftop to basement, including kitchen, bath and laundry drains. The plated cage with an inner drum carries 75 ft of 1/2" cable.

Click Here for More Information

SPLITTER-LOG,(22TON)

Built specifically for the demands of the rental market, the Barreto log splitter is the industrial standard. With a 790 lb. frame, a high carbon wear-alloy wedge, and a 6” x 25 lb. wide flange beam, this splitter is built to endure. The knife plate features high wear nylon pads. Torsion axle suspension reduces bounce and improves tracking and towability when transporting. The cushion mounted log cradle is designed to snap out of the way when using the splitter in the vertical position. A rubber bump stop protects the splitter when transitioning from vertical to horizontal and spring loaded lock bars secure the splitter in place. The engine is mounted on rubber isolators to protect from vibration when towing or operating.

Click Here for More Information

SPLITTER-LOG,(7-TON)ELECTRIC

 7 tons of splitting force

One-handed operation

Automatic ram return

Lightweight and portable

Strong tube log trays / legs

Durable 2 HP motor

Click Here for More Information

STAPLER-SUBFLOOR,-(AIR)

The N5008AC Construction Stapler is used for construction work such as wall sheathing, roof decking, and subflooring.

 

Click Here for More Information

STAPLER-T&G,(3/8IN.AIR)

  • Tool-free adjustable foot adapts from 1/4" to 1/2" engineered flooring
  • 20-gauge fastener helps prevent damage to flooring
  • Lightweight magnesium design for added durability
  • Oil-free operation requires no regular maintenance and eliminates the risk of oil stains
  • Ultra-quiet rear exhaust directs air away from the user

Click Here for More Information

STEAMER-VAPOR LUX(MINI BOILER)

VaporLux can be used for restoration on many surfaces, some of the most frequently talked about are tile and grout, hardwood and commercial kitchen equipment. The results are the same on most surfaces, colors are more vibrant, details are finer, and things look newer.

Power supply 110V, (12V at handle)
Power 1,600 Watts
Boiler capacity 1.29 Gallons
Vapor pressure 72 P.S.I. max
Vapor regulator 0-72 P.S.I.
Boiler temperature 311º F
Machine housing 304 Stainless Steel
Unit Weight 25 lbs.(Empty)
Cart Extruded Aluminum

Click Here for More Information

STEAMER-WALLPAPER,(ELECTRIC)

  • Profiled step for safe, comfortable working platform
  • 2 gallon anodised water tank  
  • Lightweight anti-coil steamplate
  • Steam hose – 15 feet long
  • Anti-kink Coolrun hose
  • Integral water level indicator
  • Neon on/off switch, two thermal protection devices

Click Here for More Information

STRIPPER-RIDE, (BATTERY)

Features:
• On board, built-in charging system has the versatility to plug into any outlet
• Does not produce harmful fumes, allowing machine to be used on almost any jobsite
• Allows extended run time
• Has the ability to operate 8 to 10 hours on a single charge regardless of the floor application - no need for multiple battery sets
• Comfortable to ride and drive
• Ergonomically designed controls for safe and easy handling
• Precise hydraulic steering for maneuvering in tight spaces
• Built-in charging system
• The unique swivel head keeps the blade in contact with the floor
• Sliding front plate allows for exact blade angle
• Adjustable blade pitch and angle
• Zero turn radius
• Non-marking tires

Click Here for More Information

STRIPPER-RIDE, (PROPANE)

The workhorse in floor removal technology, the 60HP Terminator T-2100PRO is designed to meet the needs of the most demanding removal project. Utilizing Innovatech’s unique "Cool Flow" hydraulic system, dual joystick design, integrated swivel head, and 15 years of experience the T-2100PRO has no equal. The new T-2100PRO is capable of removing VCT, carpet, ceramic, hardwood, roofing material, sports courts, and just about any other flooring material. Power, solid design, reliability, ease of operation, and the experience to back it up make the T-2100PRO the only choice for the serious contractor.

Click Here for More Information

STRIPPER-TILE,(BIGSTICK-15CFM)

Air-Powered EDCO Chisel Scalers eliminate hammers, chisels and hand labor!
 
•Remove up to 300 sq. ft. per hour of 4" ceramic tile set in standard thin-set
•Provides 3,500 hits per minute
•High-strength tubular handle and soft foam hand grips for operator comfort
•Extra large piston for harder hitting action
•Quick-change, hardened steel tool chuck accepts Big Stick accessories
•Big Stick available in heavy-duty steel or lightweight aluminum
•Requires 12-15 CFM at 90 PSI
 
Removes:
 
•Tiles (vinyl, ceramic, quarry...)
•Carpeting
•Roofing materials
•Fireproofing
•Rubber coatings
•Waterproofing
•Linoleum
•Insulation
•Asbestos
•Mastics
•Paint build-up
•Ice

 

Click Here for More Information

STRIPPER-TILE,(ELECTRIC)

  • Remove up to 200 sq. ft. per hour of vinyl or other related soft material (Square footage amounts and time schedules will vary based on material and adhesion)
  • Folding handle for easy transport & storage
  • Heavy-duty steel material deflector shield
  • Quick release pin angle adjustment
  • 7-Gauge steel welded construction
  • Push plate & built-in weight make material removal a quick & easy job

Click Here for More Information

STRIPPER-TILE,(STANDARD- 8CFM)

Air-Powered EDCO Chisel Scalers eliminate hammers, chisels and hand labor!
 
•Ergonomic design lets operator stand upright eliminating backaches
•Removes up to 200 sq. ft. per hour of 4" ceramic tile set in standard thin-set
•Provides 2,500 hits per minute
•High-strength tubular handle and soft foam hand grips for operator comfort
•Quick-change, hardened steel tool chuck accepts dozens of accessories
•Available in heavy-duty steel or lightweight aluminum
•Requires only 6-8 CFM at 80-90 PSI
 
Removes:
 
•Tiles(vinyl, ceramic, quarry...)
•Carpeting
•Roofing Materials
•Fireproofing
•Rubber coatings
•Waterproofing
•Linoleum
•Insulation
•Asbestos
•Mastics
•Paint build-up
•Ice

Click Here for More Information

STRIPPER-TILE,(TURBO)

•Totally self-propelled, with instant forward
•Variable Speed, 10-45 feet per minute      
•Whisper quiet technology, operate in any occupied area      
•Electrical overload protection
•Durable steel housing      
•Runs on 13 amps, no more tripping circuit breakers
•Easy to operate hand-controlled clutch for speed & safety       

 

Click Here for More Information

STUD-DRIVER,(LOW VELOCITY)

The fully automatic tool that is fast, reliable, versatile and easy to use.

Click Here for More Information

SUCTION CUPS,(8IN-PAIR)

 

Hand cups use vacuum to lift and carry loads,
A manual pump removes air from between the rubber pad
and the contact surface; There is a red line on the pump's
plunger that serves as a vacuum indicator; a check valve
allows the user to repump the cup without removing it from
the contact surface; and a release mechanism allows the
cup to disengage completely from contact surface.
 
Model       Pad Diameter  Max. Load Capacity
N4950                  8 Inch                    125 Pounds

Click Here for More Information

SWEEPER,(BOBCAT)

You can sweep, collect and dump dirt and other debris with just one attachment.

Click Here for More Information

SWEEPER-RIDE,(8FT.BROOM)

Engine Kubota V1505 diesel, 37 HP
Broom Size 6-3/8” I.D. x 24” O.D.
Broom Angle 40° (each way)
Steering 45° (each way)
Speed 0 to 7.5 mph
Machine Weight 6HC 3,000#
Machine Weight 8HC 3,100#
Transport Width, Fully Angled 6HC 6’9”
Transport Width, Fully Angled 8HC 7’10”
Transport Length, Hitch Down 14’

Click Here for More Information

THREADER-PIPE,(1/2

  • Heavy-duty hand-held power drive.
  • Features reversible 115V universal motor.
  • Capacity 1/8"-2" (3mm-50mm) pipe. Designed for RIDGID No. 12R die heads.
  • CSA approved.
  • Approved to UL standards (NRTLC).

 

Click Here for More Information

THREADER-PIPE,(2-1/2

Used with the Ridgid #300 pipe threader

Click Here for More Information

THREADER-PIPE,(3/4

  • RIDGID speed chuck.
  • Reversible 1/2 HP universal motor.
  • Capacity: 1/8"-2" (3mm-50mm) pipe, 2 1/4"-4" with 141, and 4"-6" with 161 Geared Threaders; 1/4"-2" (6mm-50mm) rod.
  • Recessed On/Off/Reverse switch.
  • CSA approved.
  • Approved to UL standards (NRTLC).

Click Here for More Information

THREADER-PIPE,(4

Used with the Ridgid #300 pipe threader

Click Here for More Information

TILLER,(3HP)-CULTIVATOR

  • Easy starting Honda mini 4-stroke engine
  • Less than 29 lbs
  • Tills 9" wide
  • Patented Honda hybrid tines for unsurpassed performance
  • Fastest tine speed - 294 RPM

 

Click Here for More Information

TILLER,(8HP)-GEAR

  • Easy starting Honda commercial OHV engine
  • 20" tilling width
  • 12" tine diameter
  • Convenient "loop handle" design allows operation from either side
  • Self propelled - 3 forward speeds, 1 reverse
  • Commercial grade construction

Click Here for More Information

TILLER-ATTACHMENT,(DINGO)

Break through hard soil conditions up to 6" deep. Avoid clogging the tiller by using one easy hand control to reverse the direction of the tiller to clear jams from rocks and debris.

Click Here for More Information

TORCH-OXYGEN/PROPANE

TORCH-OXYGEN/PROPANE

*Oxygen and Propane charges not included*

Click Here for More Information

TRAILER-DUMP,(6FT X 12FT)

  • These trailers offer many versatile applications, from a jobsite dumpster to equipment trailer to delivery truck to dump truck. It’s four products in one.
  • The EZ6812LP holds up to 5.15 cubic yards

Click Here for More Information

TRAILER-SINGLE AXLE,(W/RENTAL)

The use of this trailer is only for transport of ABC Equipment Rental's heavy equipment.

 

Click Here for More Information

TRAILER-TANDEM AXLE,(W/RENTAL)

The use of this trailer is only for transport of ABC Equipment Rental's heavy equipment.

Click Here for More Information

TRANSMITTER-SeeTech ST-510

 

Features
Direct Connect using attached Clips
Induction from the optimal Inductive Signal Clamp
Induction from the Transmitter Coils
Specifications
Frequencies: 128Hz, 1kHz, 8kHz, 33kHz
Output Power: 10 Watt, Variable
Display: LCD
Weight: 8.9 lbs.

Click Here for More Information

TRAP-ANIMAL,(18

These traps are light-weight and extremely easy to operate, with a hand protection plate to keep the animal from scratching you while you are carrying the trap.

Click Here for More Information

TRAP-ANIMAL,(32

These traps are light-weight and extremely easy to operate, with a hand protection plate to keep the animal from scratching you while you are carrying the trap.

Click Here for More Information

TRENCHER-924,(2FT.BOOM)

The innovative new 912 self-propelled trencher is perfect for the landscape contractor or homeowner with smaller trenching applications such as sprinkler systems.

Click Here for More Information

TRENCHER-ATTACHMENT,(DINGO)

High-torque, heavy-duty drive system guarantees performance in any soil condition from rock to clay

Click Here for More Information

TRIMMER-HEDGE,(POLE)

  • Head adjusts 270° (135° working range) in 13 locking positions without tools
  • 135° head folds flat for transport and storage convenience
  • 24 inch cutting blade double-sided
  • Extended length pole for more reach

Click Here for More Information

TRIMMER-HEDGE,24IN.(2/CYCLE)

  • Lightweight and well-balanced design with low vibration levels
  • Rear swivel handle for improved comfort at various speeds
  • 24" double-sided blade length
  • Tip protector

Click Here for More Information

TRIMMER-HEDGE,24IN.(ELECTRIC)

  • 24 inch bar with double sided blades
  • 120v 4.5amp motor
  • Requires standard extension cord

Click Here for More Information

TROWEL-POWER,(48IN)

  • Quick-Pitch Handle for rapid blade changing
  • Combination blades
  • 48" width
  • Purchase of blades required

 

Click Here for More Information

VACUUM-INSULATION

 

Insulation Removal Vacuum – Versa-Vac 18 – Top Of The Line 18 HP Workhorse
When you need the most power and handling capacity you can get to take care of the toughest and messiest jobs, the Versa-Vac 18 is your best choice. The Versa-Vac 18 insulation removal vacuum is designed for removal of blown-in insulation as well as fire, water, and smoke damaged insulation in attics, sidewalls and crawl spaces. Material can be discharged directly into 75 cu. ft. disposable bags or directly into a Dumpster.
 

 

Click Here for More Information

VACUUM-LAWN

Whether it is residential clean-up for your patio, lawn, driveway, walkway, shrubs, beds, decks, pool areas, trees, parking lots, or fence line – Billy Goat’s lawn vac eats and bags all your yard clean-up chores.

Click Here for More Information

VACUUM-WET/DRY,(10GAL)

Perfect for home use, contractors, woodworkers, drywallers, autoshops.

Good for wet or dry material

Click Here for More Information

VISE-PIPE,(TRI-STAND)

  • Integral legs and tray fold in for easy carrying and setup. Large vise base overhangs front legs for clear tool swing.
  • Complete with slots for hanging tools, pipe rest, three-pipe benders, and ceiling brace screw.
  • Model 460 features a larger work surface for increased pipe capacity, 6" diameter, rear support and receding ceiling brace screw

Click Here for More Information

WALKBOARD--(12IN X 12FT)

  • Heavy Duty Rung System            
  • Raised and "Abraded" Decking 
  • Cast Aluminum Handle-Style Endcaps

Click Here for More Information

WALKBOARD--(14IN X 20FT)

  • Heavy Duty Rung System            
  • Raised and "Abraded" Decking 
  • Cast Aluminum Handle-Style Endcaps

Click Here for More Information

WALKBOARD--(14IN X 30FT)

  • Heavy Duty Rung System            
  • Raised and "Abraded" Decking 
  • Cast Aluminum Handle-Style Endcaps

Click Here for More Information

WALKBOARD-EXP.(8FT-13FT)

The telescoping plank has the strength to do the job safely, and the compactness to store easily after the work is done.

Click Here for More Information

WAND-EXTENSION,(18FT)

Reach high places safer and easier with light-weight fiberglass telescoping wand.

Pressure 2,000 psi.- 3,000 psi.
Working Range 6 ft.- 18 ft.
Material Fiberglass
Weight 6 lbs.

Click Here for More Information

WASHER-PRESSURE,C.W.(2000PSI)GAS

Pressure washers can boost water pressure from your garden hose as much as sixty times. With this increased pressure you can blast away deck and siding mildew, clean driveways and parking lots and other areas quickly and easily.

Pressure 2,000 psi.
Gallons per Minute 2.8 gal.
Power Rating 5.5 hp.
Fuel Type Gasoline
Length 37 in.
Width 21 in.
Height 24 in.
Weight 155 lbs.

Click Here for More Information

WASHER-PRESSURE,C.W.(3000PSI)GAS

Package includes 50 ft of pressure hose and 3ft. wand, extra hose and telescoping wand available.

Pressure 3,000 psi.
Gallons per Minute 3.5 gal.
Power Rating 11 hp.
Fuel Type Gasoline
Length 45 in.
Width 26 in.
Height 24 in.
Weight 200 lbs.

Click Here for More Information

WASHER-PRESSURE,H.W.(3000PSI)GAS

Package includes 50 ft of pressure hose and 3ft. wand, extra hose available.

Pressure 3,000 psi.
Gallons per Minute 3.5 gal.
Power Rating 11 hp.
Engine Fuel Type Gasoline
Burner Fuel Type Kerosene
Length 45 in.
Width 30 in.
Height 43 in.
Weight 530 lbs.

Click Here for More Information

WEED EATER,(2/CYCLE)

Ideal for long periods of use, you can let the harness help carry the weight of the FS 110 bike handle trimmer. Capable of handling tough jobs, this STIHL grass and weed trimmer not only has quick, smooth acceleration and a revolutionary low-emission engine design—it’s well balanced with a lightweight low-profile design, making it comfortable to use for long periods.

Click Here for More Information

WELDER-130AMP.,(WIRE FEED)

  • Light Fabrication
  • Maintenance and Repair
  • Auto Body
  • Farm and Ranch
  • Home

Click Here for More Information

WHEELBARROW,(6CU.FT)

Construction grade wheelbarrows are made for the serious mason contractor or concrete contractor.  Also perfect for general jobsite clean up and home owner use.

 

Click Here for More Information