Rental Inventory

GRINDER-CONCRETE,(10IN/110V

Additional items must be rented with this item. Please refer to related rental items on next page

11" Working width will grind approximately 200-250 sq. ft. per hour at 1/32" with EDCO Dyma-Serts
Areas less than 1,500 square feet
Grinding concrete
Repairing damaged concrete slabs
Removing urethanes or epoxy thin-coats
Leveling high spots or surface imperfections
Smoothing rough surfaces, rain marks or trowel marks
Removing mastics, thin-sets, paint build-ups, resins and more

22" working width will grind approximately 400-500 sq.ft. per hour at 1/32" with EDCO Dyma-Serts
Production grinding and floor cleaning on large or small surface areas such as airports, warehouses, parking decks, manufacturing plants, malls and sports arenas
Light grinding or cleaning of concrete surfaces
Leveling uneven joints
Removing mastics, thin-set, high spots, epoxies and urethanes
Lightly texturing slippery concrete surfaces

10" Working width will grind approximately 400-500 sq. ft. per hour at 1/16" with an EDCO Diamond Disc
Grind wet or dry
Grinding uneven expansion joints, high spots, joint curls and bridge decks
Removing coatings
Grinding rough concrete surfaces
Purchase of a 10"diamond disc required for this rental

22" working width will grind approximately 400-500 sq.ft. per hour at 1/32" with EDCO Dyma-Serts
Production grinding and floor cleaning on large or small surface areas such as airports, warehouses, parking decks, manufacturing plants, malls and sports arenas
Light grinding or cleaning of concrete surfaces
Leveling uneven joints
Removing mastics, thin-set, high spots, epoxies and urethanes
Lightly texturing slippery concrete surfaces

22" working width will grind approximately 400-500 sq.ft. per hour at 1/32" with EDCO Dyma-Serts
Production grinding and floor cleaning on large or small surface areas such as airports, warehouses, parking decks, manufacturing plants, malls and sports arenas
Light grinding or cleaning of concrete surfaces
Leveling uneven joints
Removing mastics, thin-set, high spots, epoxies and urethanes
Lightly texturing slippery concrete surfaces

As stump cutters go, the SC652 is small in stature but big on performance.

It goes where tow-behind machines can’t and makes short work of stumps

when it gets there.

Features: 10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protection
Quick-change wheel release provides easier and quicker wheel removal without the need for a wrench
Keyless adjustable guard provides tool free guard adjustment thus increasing productivity
Vibration reducing removable side handle provides user comfort and reduces user felt vibration
Paddle switch lock-off provides the user protection from accidental start up

High power 4 HP (maximum motor HP) 6,000 rpm motor with overload protection provides higher operating speeds under load
3 position side handle provides improved ergonomics for specific applications
6,000 rpm is a midrange speed for use with multiple accessories
3 wire grounded ’S’ jacket rubber cord provides increased durability and life in hot and cold climates
Lightweight increases productivity in extended use applications