DETECTOR-TRANSPOINTER,(4-FOOT)
Makes it easy to locate and measure exit holes in floors and walls up to 4 feet thick!
DETECTOR-SNAKE,(RIDGID)
NaviTrack II can Locate:
-
SeeSnake In-Line Transmitters.
-
Remote Transmitters (Sondes).
-
Energized Metallic Lines.
-
Energized Electical Lines
-
Approach the transmitter from any direction for faster, more accurate locates.
-
Verify the locate using the large mapping display.
-
Depths of greater than 15’ can be read.
DETECTOR-PIPE,(M-SCOPE)
-
For tracing buried cable, TV lines, phone lines and other metallic lines which can carry an electromagnetic signal.
-
Fully variable 10 watts of power output.
-
Two 25’ coil connectors.
-
Conductive ground rod.
-
128 Hz, 1 kHz, 8 Hz, 33 kHz - 10 Watt
-
200 kHz, 262 kHz - 1 Watt output power.
-
Used with the NaviTrack II locator
DETECTOR-LEAK, (SUBSURFACE)
Survey for water leaks by listening at hydrants and valves with the sensor and magnet. Survey at water meters with a Long Contact Rod
Pinpoint water leaks in pipes under asphalt or concrete with the base plate attached to the sensor and magnet
DETECTOR-METAL
-
AutoTrac® samples the ground and electronically resets for maximum depth and sensitivity.
-
Turn-on-and-go Simplicity. 2 controls-DISC and SENS.
-
Auto Trac® Toggle Beach, Auto and Off Mode.
-
Pinpoint/All Metal Mode Just squeeze and hold the trigger under the display to read the target depth and watch the pinpoint blocks to see when you are directly over the target.
-
High performance and easy to operate.
DETECTOR-MAGNA TRAK,(POLE)
The Magna-Trak 102’s LCD indicator offers a digital bar graph display, in addition to a standard audio tone, to precisely identify the target object, especially in noisy, congested areas. When a magnetic disturbance, such as a metal fence, is confronted, simply press the "erase" button and the disturbance is erased for continued searching without interference. No need to reduce the sensitivity; the Magna-Trak 102 always returns to perfect magnetic balance when the "erase" button is pressed
