Rental Inventory

Return to Rental Inventory


Survey for water leaks by listening at hydrants and valves with the sensor and magnet. Survey at water meters with a Long Contact Rod

Pinpoint water leaks in pipes under asphalt or concrete with the base plate attached to the sensor and magnet

Click Here for More Information


The Magna-Trak 102’s LCD indicator offers a digital bar graph display, in addition to a standard audio tone, to precisely identify the target object, especially in noisy, congested areas.  When a magnetic disturbance, such as a metal fence, is confronted, simply press the "erase" button and the disturbance is erased for continued searching without interference. No need to reduce the sensitivity; the Magna-Trak 102 always returns to perfect magnetic balance when the "erase" button is pressed

Click Here for More Information


SeeTech SR-60 can Locate:

  • SeeSnake In-Line Transmitters.
  • Remote Transmitters (Sondes).
  • Energized Metallic Lines.
  • Energized Electical Lines
  • Approach the transmitter from any direction for faster, more accurate locates.
  • Verify the locate using the large mapping display.
  • Depths of greater than 15’ can be read.

Click Here for More Information



Direct Connect using attached Clips
Induction from the optimal Inductive Signal Clamp
Induction from the Transmitter Coils
Frequencies: 128Hz, 1kHz, 8kHz, 33kHz
Output Power: 10 Watt, Variable
Display: LCD
Weight: 8.9 lbs.

Click Here for More Information



The RIDGID Inductive clamp allows users to apply a signal to a cable or pipe when connecting directly to the target conductor is not possible.
The clamp couples the transmitting signal onto the conductor which then allows users to locate using a
compatible receiver, such as the SeeTech SR-60.
Two built in LED’s inform the user the clamp is functioning properly.
An integrated adapter allows users to attach a hotstick for out of reach lines.

Click Here for More Information


  • AutoTrac® samples the ground and electronically resets for maximum depth and sensitivity.
  • Turn-on-and-go Simplicity. 2 controls-DISC and SENS.
  • Auto Trac® Toggle Beach, Auto and Off Mode.
  • Pinpoint/All Metal Mode Just squeeze and hold the trigger under the display to read the target depth and watch the pinpoint blocks to see when you are directly over the target.
  • High performance and easy to operate.

Click Here for More Information


Makes it easy to locate and measure exit holes in floors and walls up to 4 feet thick!

Click Here for More Information