Making Your Job Easier
Rental Inventory
AERATOR---STANDARD---,(28IN.WIDE)
Improved air exchange between the soil and atmosphere. Enhanced soil water uptake. Improved fertilizer uptake and use. Reduced water runoff and puddling. Stronger turfgrass roots. Reduced soil compaction. Enhanced heat and drought stress tolerance.
AERATOR-COMMERCIAL,(38IN.WIDE)
Improved air exchange between the soil and atmosphere. Enhanced soil water uptake. Improved fertilizer uptake and use. Reduced water runoff and puddling. Stronger turfgrass roots. Reduced soil compaction. Enhanced heat and drought stress tolerance.
AERATOR-PULL,(3FT.WIDE)---PLUGGER
Improved air exchange between the soil and atmosphere. Enhanced soil water uptake. Improved fertilizer uptake and use. Reduced water runoff and puddling. Stronger turfgrass roots. Reduced soil compaction. Enhanced heat and drought stress tolerance.
AERATOR-PUSH
AERATOR-VERTICAL CORING(28IN.WIDE)
AIR CONDITIONER,(1.1-TON)
Great for cooiling a new space, supplemental cooling for tenant space or back-up emergency spot cooling for your computer room or data center.
AIR SCRUBBER,(2,100-CFM)
BACKHOE-CAT-416D,(W/BREAKER)
BACKHOE-CATERPILLAR,(416D-4WD)
|
Digging Depth |
18 ft. 1 in. |
| Backhoe Bucket Size | 24 in. |
| Backhoe Lift Capacity | 4,642 lbs. |
| Loader Dump Height | 10 ft. 10 in. |
| Loader Lift Capacity | 4,642 lbs. |
| Overall Width | 7 ft. 5 in. |
| Power Rating | 86 hp. |
| Fuel Type | Diesel |
| Powertrain | 4-Wheel Drive |
| Weight | 16,882 lbs. |
BACKHOE-TERRAMITE, (8FT.BOOM)
| Digging Depth | 8 ft. 4 in. |
| Backhoe Bucket Size | 16 in. |
| Backhoe Lift Capacity | 750 lbs. |
| Loader Dump Height | 6 ft. 9 in. |
| Loader Lift Capacity | 1,700 lbs. |
| Overall Width | 48 in. |
| Power Rating | 20 hp. |
| Fuel Type | Gasoline |
| Powertrain | 2-Wheel Drive |
| Weight | 3,100 lbs. |
BANDING TOOL-1/2IN.(PLASTIC)
BAR-DIGGING
BAR-JOHNSON,(6FT)
BARRICADES-CROWD CONTROL
| Height | 43 in. |
| Length | 8 Ft. |
| Frame Tube Diameter |
1-1/2 In. |
| Vertical Bars Diameter |
5/8 in. |
| Weight | 57 lbs. |
| Flat Leg Width | 24 in. |
BENDER-EMT/RIDGID,--(1/2IN-2IN)
- Four-in-one-shoe handles 1', 1-1/4', 1-1/2, 2' EMT, IMC and Rigid steel and aluminum conduit.
- Puncture-proof pneumatic tires with steel rims and precision ball bearings for tough jobsite conditions.
- Quickly remove the shoe and bridge to reduce weight for easy handling.
- Easy to load and unload.
- Squeeze adjustment to compensate for conduit variations. Smooth wrinkle-free bends.
BENDER-PVC/HEATER,(1/2-4)
Easy to use: preheat for 10 minutes, open lid and position PVC, close lid, rotate until pliable, open lid, remove PVC and form bend.
- Heavy-duty, insulated metal walls and cover with reflective interior for efficient, even heat.
- Full length door for easy loading and unloading.
- On/off switch with indicator light.
- Sturdy wheels for easy mobility.
BLANKET-CONCRETE,(6FT.X 25FT)
BLOWER-BACKPACK,(2/CYCLE)
BLOWER-INSULATION
Our FORCE/1 package processes over 540 lbs of cellulose or 187 lbs of fiberglass per hour and weighs 177 lbs. The durability of this unit is enhanced with urethane seals, a direct drive transmission, and polyethylene construction which resists dents & dings, allowing for an attractive system appearance over years of use. This system provides ease of transportation to the job site in addition to timely installation of attic insulation – either cellulose or fiberglass -- at 2 hours for R-19 in 1500 square foot attic
BLOWER-STRAW
The B70 Straw Blower is perfect for the mid-size mulching projects such as home sites, industrial and commercial projects, and highway roadsides. With the versatile B70 you can do a number of applications including seed protection, soil stabilization, erosion control and straw mulch applications.
BLOWER-TURBO DRYER
BLOWER-VENTILATION,(ELECTRIC)
BLOWER-WALK BEHIND
BRAKE-ALUMINUM,(10FT)
BUGGY-POWER,(16CU-TRACKS)
BUGGY-POWER,(16CU.FT)-GAS
CAMERA-SeeSnake-MINI
1 1/2’’ lines up to 200’
At 25 pounds, the Mini-SeeSnake combines portability with a rugged camera used to inspect lines up to 200 feet. It is built tougher for unmatched durability, reliability and performance.
CAMERA-SeeSnake-PLUS
-
Inspects 3" lines and larger:
- 3" P-Traps.
-
Rugged, high-intensity lights for improved reliability.
-
Flexible transmitter makes locating easier and is fully compatible with RIDGID SeeTech SR-60 locators.
-
Compatible with any SeeSnake monitor.
CARBIDE BIT-(1-1/2IN),LONG
CARBIDE BIT-(2-1/2IN),CORE
CARBIDE BIT-(3/16IN),SHORT
CARBIDE BIT------(2IN),LONG
CARBIDE-BLOCK,(SET OF 3)
Strip-Serts are carbide tipped blocks designed to clean floors without grinding into the concrete.
- Removing mastics, paints, resins, tar, fiberglass, ice and industrial buildups
CARBIDE-BLOCK,(SET OF 6)
Strip-Serts are carbide tipped blocks designed to clean floors without grinding into the concrete.
- Removing mastics, paints, resins, tar, fiberglass, ice and industrial buildups
CARPET-EXTRACTOR,(COMPACT)
Carpet & upholstery cleaning hot-water extractors are perfect for the homeowner who wants a professional machine that is built to last, and for businesses needing a compact, lightweight commercial machine.
-
Upholstery attachment included with rental
CARPET-IRON,(SEAMING)
CARPET-KICKER,(KNEE)
CARPET-POLE
CARPET-STRETCHER
CHAINSAW-14IN.,(ELECTRIC)
-
Toolless Quick Chain Adjuster for fast and easy chain adjustment
-
Coast-down brake as an additional braking system
-
Thermal overload cut-off switch
-
Wide trigger switch
-
Automatic cut-off when brushes become worn
CHAINSAW-15IN.,(CONCRETE)-PKG
ICS Concrete Chain Saws let you make deeper, cleaner and more accurate cuts, in less time. Deeper cuts and square corners means getting the job done with fewer steps. No more trying to match up cuts from both sides. No more impact tools that risk damage to the surrounding concrete or masonry. No more over-cutting corners.
Note: Does not include chain ask store for details.
CHAINSAW-18IN.,(2/CYCLE)
-
Decompression valve
-
Adjustable automatic bar and chain oiler
-
IntelliCarb compensating carburetor
-
Side-access chain tensioner
-
Toolless fuel and oil caps with retainers
CHIPPER--6IN.,(30HP)
CHIPPER-12IN.,(110HP)
CHIPPER-SMALL,(18HP)
CHUTE-CONCRETE,(16FT)
CLAMP-INDUCTIVE ST-33Q
Features
The RIDGID Inductive clamp allows users to apply a signal to a cable or pipe when connecting directly to the target conductor is not possible.
The clamp couples the transmitting signal onto the conductor which then allows users to locate using a
compatible receiver, such as the SeeTech SR-60.
Two built in LED’s inform the user the clamp is functioning properly.
An integrated adapter allows users to attach a hotstick for out of reach lines.
COMPRESSOR---5HP.,(GAS)
COMPRESSOR---8HP.,(GAS)
Ideal For: 2 EDCO ALR model Chisel Scalers 1 EDCO ALR Big Stick™ 6-8 Framing/Sheathing guns 8-10 Roofing guns
COMPRESSOR-1.5HP.(ELECTRIC)
Best CFM in class 4.0 CFM of free air@100psi
COMPRESSOR-185CFM,(BARE)
Possible to use more than one air tool at a time. Delivers 90 cfm from each air outlet.
CONES-TRAFFIC,(28IN)
CONVEYOR,(25FT X 12IN)
CUTTER-BOLT,(36IN)
CUTTER-PIPE,(2IN)
CUTTER-PIPE,(4IN)
CUTTER-PIPE,(6IN)
CUTTER-PIPE,(CAST)-RATCHET
- Cuts 1 1/2"-6" clay, cast-iron or cement pipe and 4" class 22 water main.
- Ratchet-action handle parallel to pipe allows for application in minimum width trenches.
- Complete with hand guard to protect operator’s knuckles when cutting.
CUTTER-SHINGLE,(ASBESTOS)
CUTTER-SLATE
CUTTER-SOD,(12IN)-GAS
CUTTER-SOD,(12IN)-MANUAL
CUTTER-TILE,(CERAMIC-8IN)
CUTTER-TILE,(VINYL)
Accurate and simple to use
• Self-measuring stop automatically aligns at last field tile
• Cuts 12" x 12" tile straight
CYLINDER----OXYGEN,(ONLY)
DEHUMIDIFIER
- Removes up to 15 gallons a day
- Hot-gas bypass for fast defrost
- Electronic touch-pad controls
- Rigid handle – designed for rugged service
- Semi-pneumatic wheels for easy transport
DEHUMIDIFIER,(1GPH)
-
Up to 28 gallons a day
-
Low grain refrigerant with patented heat pipe technology
-
Electronic touch-pad controls
-
Semi-pneumatic wheels
-
Built-in ring for easy attachment of ducting
DETECTOR-LEAK, (SUBSURFACE)
Survey for water leaks by listening at hydrants and valves with the sensor and magnet. Survey at water meters with a Long Contact Rod
Pinpoint water leaks in pipes under asphalt or concrete with the base plate attached to the sensor and magnet
DETECTOR-MAGNA TRAK,(POLE)
The Magna-Trak 102’s LCD indicator offers a digital bar graph display, in addition to a standard audio tone, to precisely identify the target object, especially in noisy, congested areas. When a magnetic disturbance, such as a metal fence, is confronted, simply press the "erase" button and the disturbance is erased for continued searching without interference. No need to reduce the sensitivity; the Magna-Trak 102 always returns to perfect magnetic balance when the "erase" button is pressed
DETECTOR-METAL
-
AutoTrac® samples the ground and electronically resets for maximum depth and sensitivity.
-
Turn-on-and-go Simplicity. 2 controls-DISC and SENS.
-
Auto Trac® Toggle Beach, Auto and Off Mode.
-
Pinpoint/All Metal Mode Just squeeze and hold the trigger under the display to read the target depth and watch the pinpoint blocks to see when you are directly over the target.
-
High performance and easy to operate.
DETHATCHER,(5HP)
Free-swinging flail blades efficiently remove matted thatch with centrifugal force. This design provides excellent thatch removal.
DIAMOND BIT-----(2IN),CORE
DIAMOND-BLADE,(14IN)HAND
DIAMOND-BLOCK,(SET OF 3)
-
Smoothing rough surfaces or trowel marks
-
Grinding or polishing terrazo
-
Repairing surface damage to concrete slabs
-
Removing urethane or epoxy thincoats
-
Grinding sharp aggregates such as flint and granite
-
Removing surface imperfections from epoxy mortars
-
Leveling high spots
-
Removing thin mastics and thin-set
DIAMOND-BLOCK,(SET OF 6)
-
Smoothing rough surfaces or trowel marks
-
Grinding or polishing terrazo
-
Repairing surface damage to concrete slabs
-
Removing urethane or epoxy thincoats
-
Grinding sharp aggregates such as flint and granite
-
Removing surface imperfections from epoxy mortars
-
Leveling high spots
-
Removing thin mastics and thin-set
DIAMOND-INSERT,PCD GRIT,(4)
These segments have a rough diamond grit for aggresive grinding of concrete, which is also good for removing mastic from ceramic tile, hard glue and resin on hard concrete surfaces. It leaves a very rough surface good for the istallation of new ceramic tile, some epoxys and membranes. This set of diamonds is used with our 10" grinder 110v item number 5870
DIAMOND-INSERT,PCD GRIT,(6)
These segments have a rough diamond grit for aggresive grinding of concrete, which is also good for removing mastic from ceramic tile, hard glue and resin on hard concrete surfaces. It leaves a very rough surface good for the istallation of new ceramic tile, some epoxys and membranes. This set of diamonds is used with our 18" grinder 220v item number 5880.
DIAMOND-INSERT,PCD PLATE,(4)
Good for the removal of elastic materials, glue and self levelers. This set of diamonds is used with our 10" grinder 110v item number 5870
DIAMOND-INSERT,PCD PLATES,(6)
Good for the removal of elastic materials, glue and self levelers. This set of diamonds is used with our 10" grinder 110v item number 5870
DIAMOND-INSERT,VS-1 BLUE,(4)
Grinding of epoxy or polyurethane coatings, also ideal for regular grinding with a semi smooth finish. This set of diamonds is used with our 10" grinder 110v item number 5870
DIAMOND-INSERT,VS-1 BLUE,(6)
Grinding of epoxy or polyurethane coatings, also ideal for regular grinding with a semi smooth finish. This set of diamonds is used with our 10" grinder 110v item number 5870
DOLLY-4 WHEEL,(1200LBS)
DOLLY-APPLIANCE
- Capacity 700 lbs
- Goes up and down stairs with ease
- Portable, sturdy, lightweight steel, solid-weld construction throughout
- Replaceable non-marring bumpers, ratchet system and stair rollers
DOLLY-APPLIANCE,(W/WHEELS)
- Capacity 800 lbs.
- Swing-Out Retractable Wheels
- Geared Ratchet Strap Tightener
- Big 8" Semi-Pneumatic Wheels
- One-Piece Toeplate
- Full-Frame.
DOLLY-DRYWALL
The Drywall Cart is designed to haul full capacity loads with easy maneuverability and complete stability
DOLLY-FREIGHT
Extra-long 12" cast magnesium nose, with steel wear buttons, answers the need for truck to handle bulky cartons. Includes straight cross pieces, and interlocking side rails. 8" moldon rubber tired ball bearing wheels
- Overall Height: 48"
- Overall Width: (8" Wheels) 18"
- Width at Nose: 14"
- Depth at Nose: 12"
- Weight: 22 lbs
DOLLY-FREIGHT/CONVERTIBLE
Sturdy lightweight aluminum frame
3 frame cross braces
18" wide noseplate for large loads
Extra strength noseplate cast from special aluminum
10" full pneumatic wheels
Non-marking 5" x 1.25" swivel casters
Foot pedal release allows easy conversion from two-wheel to four-wheel position
DOLLY-HYD.(ROL-A-LIFT)
Rol A Lift is the practical method of moving bulky and hard-to-handle loads.
Rol A Lifts are ideal for handling large, awkward objects or heavy equipment that is difficult to maneuver or position, like refrigerator cases, safes, or machines.
Yet they are versatile enough to safely handle fragile, sensitive equipment, like glass crates, computers, electrical panels and switchgear
DOLLY-PIANO, (GRAND)
DOLLY-PIANO, (UPRIGHT)
DOLLY-TOW
KarKaddy3 will tow almost any vehicle without difficult, time consuming adjustments to axles or ramps. This means no bolts to tighten and no heavy components to reposition.
DRILL--9LB.(HAMMER/ROTARY)
-
Drilling range: 3/16" - 1".
-
Optimum drilling range: 1/2" - 3/4".
DRILL-1/2IN.(2/CYCLE)
DRILL-1/2IN.(ELECTRIC)
DRILL-1/2IN.(HAMMER)
DRILL-1/2IN.(RIGHT ANGLE)
DRILL-3/4IN.(ELECTRIC)
DRILL-3/4IN.(MAGNETIC)
DRILL-3/8IN.(ELECTRIC)
DRILL-3/8IN.(RIGHT ANGLE)
-
Compact right-angle design for easy access in tight places
-
Paddle switch is ideal for use in awkward positions and limited access areas
-
Shielded chuck protects user and improves grip in confined areas
DRILL-65LB.ROCK,(AIR)
DRILL-CORE, (HAND/HELD)
-
Versatile, mobile and efficient
-
Cores quickly and neatly into reinforced concrete, natural stone, masonry and asphalt
-
Can be set up and operated easily by one individual
-
Water flow conveniently controlled on the side handle
-
3-speed gearing for optimum coring performance for each diameter and material type
DRILL-CORE,(LARGE)
-
Powerful, air-cooled drive unit with 3-speed gearing and convenient controls
-
Power control indicator for optimum performance
-
Quick-release motor mount for rapid assembly
-
Sturdy, versatile drill stands up to 45 degrees and folds for easy storage and transport
-
Drills up to 12" diameter hole
DRILL-CORE,(W/VACUUM PUMP)
-
Versatile, mobile and efficient
-
Cores quickly and neatly into reinforced concrete, natural stone, masonry and asphalt
-
Can be set up and operated easily by one individual
-
Water flow conveniently controlled on the side handle
-
3-speed gearing for optimum coring performance for each diameter and material type
-
Light wieght aluminum stand with vaccumm pump, no anchors needed for floor applications
DRUM-(DE-HEADER)
Open any size and gauge steel drum quickly and easily allowing drum recycling without the risk of fire from cutting with a torch
DUST COLLECTOR, (955CFM/240V)
DUST COLLECTOR,(184CFM/110V)
|
Voltage
|
110 V
|
|
Motor
|
2 kW (2.72 hp)
|
|
Dimensions (H x L x W)
|
138 cm x 67 cm x 85 cm
|
|
(54 in x 26 in x 33 in)
|
|
|
Weight
|
65 kg (143 lbs)
|
|
Filter surface
|
1.95 sq m ( 20 sq ft)
|
|
Airflow
|
max. 8200 l/min (190 cfm / min)
|
|
Depression
|
max. 21500 Pa
|
|
Cleaning
|
Manual
|
|
Dust ports
|
70 mm (2.76 in)
|
|
Capacity dust container
|
60 l (15 gals)
|
|
Noise level
|
70 dB(A)
|
DUST COLLECTOR,(290CFM/220V)
|
Voltage
|
220 V
|
|
Motor
|
3 kW (4 hp)
|
|
Dimensions (H x L x W)
|
158 cm x 67 cm x 85 cm
|
|
62 in x 26 in x 33 in
|
|
|
Weight
|
68 kg (150 lbs)
|
|
Filter surface
|
1.95 sq m ( 20 sq ft)
|
|
Airflow
|
max. 8200 l/min ( 290 cfm / min)
|
|
Depression
|
max. 21500 PA
|
|
Cleaning
|
Manual
|
|
Dust ports
|
70 mm (2.76 in)
|
|
Capacity dust container
|
100 l (26 gals)
|
|
Noise level
|
70 dB(A)
|
EDGER-BED,(LANDSCAPE)
Create seamless edges for beds around the house, pool or trees in a fraction of the time it would take you to do by hand.
EDGER-LAWN,(POLE)
You see it in the best of places. Crisp corners. Sleek lines and contours. Walkways and curbs that stand out because of the sharp borders beside them.
EDGER-LAWN,(WALK)
EXCAVATOR-#08/YANMAR, (5FT)
| Digging Depth | 4 ft. 11 in. |
| Backhoe Bucket Size | 12 in. |
| Backhoe Lift Capacity | 476 lbs. |
| Overall Width | 28 in. |
| Power Rating | 8.7 hp. |
| Fuel Type | Diesel |
| Tracks | Rubber |
| Weight | 1,985 lbs. |
EXCAVATOR-#15/YANMAR, (8FT)
| Digging Depth | 7 ft. 1 in. |
| Backhoe Bucket Size | 16 in. |
| Backhoe Lift Capacity | 982 lbs. |
| Overall Width | 39 in. |
| Power Rating | 15 hp. |
| Fuel Type | Diesel |
| Tracks | Rubber |
| Weight | 4,090 lbs. |
EXCAVATOR-#35/YANMAR, (10FT)
| Digging Depth | 10 ft. 5 in. |
| Backhoe Bucket Size | 20 in. |
| Backhoe Lift Capacity | 2,474 lbs. |
| Overall Width | 5 ft. 9 in. |
| Power Rating | 29 hp. |
| Fuel Type | Diesel |
| Tracks | Rubber |
| Weight | 8,245 lbs. |
EXCAVATOR-#50/YANMAR, (12FT)
| Digging Depth | 12 ft. 6 in. |
| Backhoe Bucket Size | 24 in. |
| Backhoe Lift Capacity | 3,334 lbs. |
| Overall Width | 6 ft. 5 in. |
| Power Rating | 39 hp. |
| Fuel Type | Diesel |
| Tracks | Rubber |
| Weight | 11,110 lbs. |
EXCAVATOR-#85/JOHNDEERE, (16FT)
| Digging Depth | 16 ft. |
| Backhoe Bucket Size | 36 in. Tooth Bucket |
| 48 in. Ditching Bucket | |
| Backhoe Lift Capacity | 4,151 lbs. |
| Overall Width | 7 ft. 9 in. |
| Power Rating | 54 hp. |
| Fuel Type | Diesel |
| Tracks | Rubber Pad |
| Weight | 18,490 lbs. |
EXCAVATOR-CX135/CASE,(19.5FT)
FAN-HIGH VOLUME,(44IN)
FAN-PEDESTAL,------(24IN)
FENCE-TEMPORARY,(8 X 6 PANELS)
Temporary Fence is the perfect solution for Jobs Sites, Festivals, Public Events or any Large Gatherings. It limits the risk of theft and vandalism while influencing positive traffic flows. Our aesthetic fence stands 6’ tall and is practically impossible to climb.
FLOAT-BULL,(48IN)
FLOOR MAINTAINER,(13IN)
- Screening floors after sanding
- Screen & recoating polyurethane floors
- Waxed floors scrubbing & polishing
- Tile Maintenance
FLOOR MAINTAINER,(18IN)
- Screening floors after sanding
- Screen & recoating polyurethane floors
- Waxed floors scrubbing & polishing
- Tile Maintenance
FLOOR MAINTAINER,(20IN)
With its hi-speed rotation combined with hi-speed pads, and floor finishes a burnisher creates heat that burnishes a glossy finish on the floor.
FLOOR MAINTAINER,(33IN)
FORK-PALLET,(BOBCAT)
FORK-PALLET,(DINGO)
This versatile attachment can be used for a variety of material handling jobs to move posts, rocks, trees, pallets, etc.
FORKLIFT, (5500LB--19FT)TX5519
Maximum Lift Height 19 ft
Maximum Forward Reach 11 ft
Maximum Lift Capacity 5,500 lbs
Travel Speed 15 mph
Weight 9,800 lbs
FORKLIFT, (8,000LB-44FT)GTH-84
Maximum Lift Height 44 ft
Maximum Forward Reach 27 ft
Maximum Lift Capacity 8,000 lbs
Travel Speed 17 mph
Weight* 22,500 lbs
FORKLIFT,(10,000LB-56FT)GTH-10
Maximum Lift Height 56 ft 10 in
Maximum Forward Reach 42 ft
Maximum Lift Capacity 10,000 lbs
Travel Speed 17 mph
Weight* 30,000 lbs
FORKLIFT,(3000LB--11FT)79IN HEIGHT
FORKLIFT,(5000LB--15FT)
FORKLIFT,(6000LB--42FT)VR-642
|
Maximum Lift Height
|
42 ft
|
|
Maximum Forward Reach
|
26’ 4 in
|
|
Maximum Lift Capacity
|
6,700 lbs
|
|
Max Travel Speed
|
17.1 mph
|
|
Operating Weight
|
19,677 lb
|
FREEZER-PIPE,(1/2IN-21/2IN)
The SuperFreeze Pipe Freezer is an easy-to-use pipe freezing unit that allows the contractor to keep water systems operating while making repairs. The RIDGID SF-2500 is a mini-refrigeration unit that circulates self-contained refrigerant to its aluminum freeze heads. This forms an ice plug in as little as 5 minutes in copper tube up to 21/2" or steel pipe up to 2". Once the pipe is plugged, repairs can be made with no fear of the ice plug melting because the unit remains on!
FURNITURE PADS
GENERATOR-(25,000 WATT)
GENERATOR-(70,000 WATT)
GENERATOR---(2,900 WATT)
GENERATOR---(4,300 WATT)
GENERATOR---(6,000 WATT)
GENERATOR-DISTRIBUTION BOX
GRAPPLE,(BOBCAT)
Load or pile logs, brush, rocks, and many other materials. Ideal for separating dirt from rock, lumber, or building materials with ease.
GRINDER,(4-1/2IN)
-
Features: 10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protection
-
Quick-change wheel release provides easier and quicker wheel removal without the need for a wrench
-
Keyless adjustable guard provides tool free guard adjustment thus increasing productivity
-
Vibration reducing removable side handle provides user comfort and reduces user felt vibration
-
Paddle switch lock-off provides the user protection from accidental start up
GRINDER,---(7-9IN)
-
High power 4 HP (maximum motor HP) 6,000 rpm motor with overload protection provides higher operating speeds under load
-
3 position side handle provides improved ergonomics for specific applications
-
6,000 rpm is a midrange speed for use with multiple accessories
-
3 wire grounded ’S’ jacket rubber cord provides increased durability and life in hot and cold climates
-
Lightweight increases productivity in extended use applications
GRINDER-CONCRETE,(10IN/110V
Powered by only 110 V single phase our grinder reaches the class of 3 phase machines, while weighing in at only 93 lbs!
- Dust free due to an integrated dust port
- Removable dust shroud. Grinds up to the wall
- Replaceable diamond segments
- Handle folds within seconds, ensuring ease of transportability
- Flexible drive coupling
- Wide variety of tooling available for paint, concrete and coating removals
Additional items must be rented with this item. Please refer to related rental items on next page
GRINDER-POLISHER,(17IN/220V)
OMEGA 450 Floor Grinder
The OMEGA 450 has the highest power-to-weight ratio in the industry.
An innovative 450mm (18 in) diameter disc gives the OMEGA 450 very high production rates, whether grinding or polishing. An integrated speed control allows the operator to adjust the rotation from 0 to 1,500 rpm.
The OMEGA 450 is at home on a variety of substrates, including concrete, terrazo, natural stone and asphalt.
Tooling options available, will support applications from aggressive grinding to polishing moderately sized areas.
GRINDER-SLAB,(DOUBLE)ELECTRIC
-
22" working width will grind approximately 400-500 sq.ft. per hour at 1/32" with EDCO Dyma-Serts
-
Production grinding and floor cleaning on large or small surface areas such as airports, warehouses, parking decks, manufacturing plants, malls and sports arenas
-
Light grinding or cleaning of concrete surfaces
-
Leveling uneven joints
-
Removing mastics, thin-set, high spots, epoxies and urethanes
-
Lightly texturing slippery concrete surfaces
GRINDER-SLAB,(DOUBLE)GAS
-
22" working width will grind approximately 400-500 sq.ft. per hour at 1/32" with EDCO Dyma-Serts
-
Production grinding and floor cleaning on large or small surface areas such as airports, warehouses, parking decks, manufacturing plants, malls and sports arenas
-
Light grinding or cleaning of concrete surfaces
-
Leveling uneven joints
-
Removing mastics, thin-set, high spots, epoxies and urethanes
-
Lightly texturing slippery concrete surfaces
GRINDER-SLAB,(DOUBLE)PROPANE
-
22" working width will grind approximately 400-500 sq.ft. per hour at 1/32" with EDCO Dyma-Serts
-
Production grinding and floor cleaning on large or small surface areas such as airports, warehouses, parking decks, manufacturing plants, malls and sports arenas
-
Light grinding or cleaning of concrete surfaces
-
Leveling uneven joints
-
Removing mastics, thin-set, high spots, epoxies and urethanes
-
Lightly texturing slippery concrete surfaces
GRINDER-SLAB,(SINGLE)ELECTRIC
-
11" Working width will grind approximately 200-250 sq. ft. per hour at 1/32" with EDCO Dyma-Serts
-
Areas less than 1,500 square feet
-
Grinding concrete
-
Repairing damaged concrete slabs
-
Removing urethanes or epoxy thin-coats
-
Leveling high spots or surface imperfections
-
Smoothing rough surfaces, rain marks or trowel marks
-
Removing mastics, thin-sets, paint build-ups, resins and more
GRINDER-SLAB,(SINGLE)GAS
-
10" Working width will grind approximately 400-500 sq. ft. per hour at 1/16" with an EDCO Diamond Disc
-
Grind wet or dry
-
Grinding uneven expansion joints, high spots, joint curls and bridge decks
-
Removing coatings
-
Grinding rough concrete surfaces
-
Purchase of a 10"diamond disc required for this rental
GRINDER-STUMP, (13HP) MANUAL
| Cutter Wheel w/ Teeth | 14 in. x 3/8 in. |
| Cutting Depth | 13 in. |
| Cutting Height | 22 in. |
| Ground Drive | Push Type |
| Power Rating | 13 hp. |
| Fuel Type | Gasoline |
| Length | 90 in. |
| Width | 31 in. |
| Weight | 420 lbs. |
GRINDER-STUMP, 25HP SELF-PROPELLED
| Cutter Wheel w/ Teeth | 19 in. x 1/2 in. |
| Cutting Depth | 13 in. |
| Cutting Height | 25 in. |
| Ground Drive | Self-Propelled Hydraulic |
| Power Rating | 25 hp. |
| Fuel Type | Gasoline |
| Length | 115 in. |
| Width w/ Single Wheels | 35 in. |
| Width w/ Dual Wheels | 50 in. |
| Trailer Hitch | 2 in. Ball or Pintle Ring |
| Weight | 1,060 lbs. |
GRINDER-STUMP, 65HP SELF-PROPELLED
As stump cutters go, the SC652 is small in stature but big on performance.
It goes where tow-behind machines can’t and makes short work of stumps
when it gets there.
| Cutter Wheel w/ Teeth | 26 in. x 1.13 in. |
| Cutting Depth | 24 in. |
| Cutting Height | 24 in. |
| Ground Drive | Self Propelled |
| Power Rating | 65 hp. |
| Fuel Type | Diesel 3.8 gph |
| Length | 12 ft. 3 in. |
| Width | 35 in. |
| Height | 76.5 in. |
| Weight | 3,900 lbs. |
GROOVER-PIPE,(1IN TO 6IN)#918
GROUND-MATS,(AlturnaMATS® 3 X 8)
GROUND-MATS,(AlturnaMATS® 4 X 8)
HAMMER-15LB.(AIR)
HAMMER-20LB.(HILTI-TE76)
-
Low vibration for increased user comfort and productivity
-
Hammering regulation from 100 to 50 power for better control in fragile materials
- Use as a chipping hammer or a hammer drill
- Optimal drilling size from 1/2 inch to 6 inch diameter holes
- Optimized mechanical clutch for maximum torque
-
Tool with ATC does not twist if drill bit catches, which minimizes accident risks
HAMMER-30LB.(AIR)
HAMMER-30LB.(HILTI-TE1000)
- 16 ft-lbs of impact energy delivers outstanding demolition performance and productivity
- Sub-chassis Active Vibration Reduction achieves the lowest vibration in its class
- Power Reduction Switch offers 30% less impact for precision work
- Light to medium demolition of concrete slabs and foundations
- Concrete removal for rebar and utility connections
- Concrete bushing, tamping earthwork and digging in clay
- Penetrations for pipes, electrical boxes, HVAC, beams, etc.
- Heavy floor tile removal
HAMMER-60LB.(AIR)
HAMMER-70LB.(ELECTRIC)
-
61 Ft-lbs impact energy provides maximum performance
-
SHOCKS - Active Vibration Control reduces user fatigue and increases comfort and productivity
-
15 amp motor provides maximum power and overload protection
-
Rubber coated handles provide greater comfort and control
-
Electronic soft start increases productivity by reducing bit walking
HAMMER-70LB.(HILTI)
Technical Data TE 3000-AVR
Power input 1800 W
Voltage 120 V
Hammering frequency 840 bpm
Single impact energy 50 ft-lbs
Weight 66 lbs
Dimensions (L x W x H) 32 x 24 x 8 in
HAMMER-90LB.(AIR)
HAMMER-ATTACHMENT, (500LB)
| Impact Energy | 500 lbs. |
| Weight | 445 lbs. |
| Length | 56.75 in. |
| BPM | 1,000 |
| GPM | 8.5-13 |
| Steel Diameter | 2.38 in. |
| Steel Length | 13.8 in. |
HAMMER-ATTACHMENT,(1000LB)
| Impact Energy | 1,500 lbs. |
| Weight | 1,120 lbs. |
| Length | 63.25 in. |
| BPM | 900 |
| GPM | 17-30 |
| Steel Diameter | 3.5 in. |
| Steel Length | 19.7 in. |
HAMMER-ATTACHMENT,(250LB)
| Impact Energy | 250 lbs. |
| Weight | 203 lbs. |
| Length | 40 in. |
| BPM | 900 |
| GPM | 4-8 |
| Steel Diameter | 1.77 in. |
| Steel Length | 11.42 in. |
HEAT GUN
HEATER-ELEC,----(5,000BTU)
HEATER-KERO,(100,000BTU)
HEATER-KERO,(150,000BTU)
HEATER-KERO,(350,000BTU)
HEATER-KERO,(600,000BTU)
HEATER-KERO,-(70,000BTU)
HEATER-LP/NATURAL,(1000000BTU)
HEATER-PATIO,---(24,000BTU)
HEATER-PROPANE,(100,000BTU)RADIANT
HEATER-PROPANE,(155,000BTU)BLOWER
HEATER-PROPANE,(170,000BTU)QUIET
HEATER-PROPANE,(250,000BTU)SALAMANDER
HEATER-PROPANE,(250,000BTU)SAL
HEATER-PROPANE,(500,000BTU)TORCH
HEATER-PROPANE,(INFRARED) 24K
HEATER-PROPANE,-(80,000BTU)BLOWER
HEATER-PROPANE,-(80,000BTU)QUIET
HOIST-CHAIN FALL, (1-TON)
HOIST-CHAIN FALL,(ELECTRIC)
HOIST-CHAIN PULL,(1.5-TON)
HOIST-ENGINE
Backyard shop, warehouse, or construction site, the Kaydee knockdown lift goes wherever the job is. The boom hook rotates 360 degrees, making it easy to pick up, load and reposition objects
HOIST-GANTRY,(2-TON)
Lightweight and easily portable, SPANCO Gantry Cranes are made from aluminum and are easy to assemble or disassemble. Popular for HVAC work or on service trucks, SPANCO Gantry Cranes will not weigh down workers on the job who need to maneuver stairways or access roofs. Because aluminum is also corrosion resistant, SPANCO Gantry Cranes are well suited for use in refrigeration areas, clean rooms and other controlled environments.
HOIST-SHINGLE,(400LBS)
HOIST-TRIPOD,(2-TON)
HOIST-TRIPOD,(9FT.-RESCUE)
tripod includes winch with 60' stainless steel cable, harness is sold separately.
HOIST-TRIPOD,(9FT.-RESCUE)
HOSE---3/4IN.(GARDEN)
HOSE-AIR,(3/4IN.X 50FT)
HOSE-AIR,(3/8IN.X 50FT)
HOSE-DISCHARGE,(1-1/2FIRE)
HOSE-DISCHARGE,(2IN.X 50FT)
HOSE-DISCHARGE,(3IN.X 50FT)
HOSE-DISCHARGE,(4IN.X 50FT)
HOSE-PRESSURE WASHER,(50FT)
JACK-FLOOR,(2-TON)
JACK-FLOOR,(5-TON)
JACK-HYD.(10-TON),1IN.HILMAN
JACK-HYD.(22-TON),SHORTY
JACK-HYD.(22-TON),STANDARD
JACK-LADDER,(PAIR)
JACK-PALLET,(4,500LBS)-ELECTRIC
JACK-PALLET,(5000LBS)-21IN.WIDE
JACK-PALLET,(5000LBS)-27IN.WIDE
JACK-SCREW
JACK-TRANS.(HYDRAULIC)
JACK-TRANS.(SCISSORS)
JACK-TRANS.(TELESCOPIC)1000LBS
LADDER-------(STAND/OFF)
LADDER--6FT.,(STEP)
LADDER-10FT.,(5-POSITION)
LADDER-16FT.,(A-FRAME)
LADDER-19FT.,(5-POSITION)
LADDER-24FT.,(EXTENSION)
LEVEL-LASER, (OUTSIDE)
The Spectra Precision® Laser LL500 Laser Level is a one-person leveling system designed for longer range measurements across your entire site. Accurate, stable and reliable, the LL500 features a 1,600 ft (500 m) working diameter which increases productivity by reducing the need for multiple setups on a large job site.
LEVEL-LASER,----(INSIDE)
- Interior and exterior commercial and residential construction
- Leveling and aligning
- Interior wall layout
- Installation of ceilings and raised floors
- Interior finishing work
LEVEL-TRANSIT,(W/STICK)
- Two-person leveling across the jobsite
- Leveling forms and footers
- Checking elevation
- Measuring cut and fill
LIFT-42FT/BUCKET,(TOWABLE)
| Working Height | 48 ft. |
| Platform Height | 42 ft. |
| Horizontal Reach | 21 ft. |
| Outrigger Footprint | 10.5 ft. x 10.5 ft. |
| Lift Capacity | 500 lbs. |
| Power | Battery |
| Trailer Hitch | 2 in. Ball |
| Weight | 3,800 lbs |
LIFT-DRYWALL,(10FT)
The Drywall Lift holds 4’ x 12’ sheets of drywall, and knock down for easy storage and handling. The winch designs use a steering wheel for easy adjustment.
LIFT-DRYWALL,(15FT)
The Drywall Lift holds 4’ x 12’ sheets of drywall, and knock down for easy storage and handling. The winch designs use a steering wheel for easy adjustment.
LIFT-GENIE,(350LBS/10FT)
GL™-10
• 11 ft 8 in (3.56 m) maximum lift height
• Up to 350 lb (159 kg) load capacity
PRODUCTIVITY
• Portable and compact design
• Lightweight durable aluminum
construction
• Single door access
• Durable standard steel forks
• 8 in (20 cm) non-marking rear wheels
and 2 in (5 cm) dual wheel front
swivel casters (standard and straddle
base only)
• 5 in (12 cm) rear swivel casters with
side brakes and 4 in (10 cm) fixed front
wheels (counterweight base only)
• Loads easily into a pickup truck
for transporting
• Hold-down mechanism secures
carriage during transport
LIFT-GENIE,(650LBS/18FT)
SLC™-18
• 18 ft 6 in (5.64 m) maximum
working height
PRODUCTIVITY
• Standard forks
• Heavy-duty design
• Strong, lightweight aluminum
telescoping mast
• Single door access
• Quick set up requires no tools
• Non-marking 4 in (10 cm) front
casters and 5 in (13 cm) rear casters
with side brakes
• Rear transport wheel assembly
• Glide rails allow easy loading and
unloading, on or off a vehicle, for
transport
• Hold-down bar secures mast assembly
during transport
LIFT-GENIE,(650LBS/24FT)
SLC™-24
• 24 ft (7.32 m) maximum working height
• Up to 650 lb (295 kg) lift capacity
PRODUCTIVITY
• Standard forks
• Heavy-duty design
• Strong, lightweight aluminum
telescoping mast
• Single door access
• Quick set up requires no tools
• Non-marking 4 in (10 cm) front
casters and 5 in (13 cm) rear casters
with side brakes
• Rear transport wheel assembly
• Glide rails allow easy loading and
unloading, on or off a vehicle, for
transport
• Hold-down bar secures mast assembly
during transport
LIFT-PLATFORM,(1-MAN)
| Working Height | 35 ft. 6 in. |
| Platform Height | 29 ft. 6 in. |
| Stowed Height | 6 ft. 6 in. |
| Stowed Width | 29 in. |
| Outrigger Footprint | 6 ft. x 6 ft. |
| Power | Battery |
| Weight | 867 lbs. |
LIFT-PLATFORM,(12FT/29IN)NAR1600#
| Working Height | 17 ft. 5 in. |
| Platform Height | 11 ft. 5 in. |
| Stowed Height | 5 ft. 2 in. |
| Width | 2 ft. 5.5 in. |
| Lift Capacity | 500 lbs. |
| Power | Battery |
| Weight | 1,581 lbs. |
LIFT-PLATFORM,(19FT/32IN)
| Working Height | 25 ft. |
| Platform Height | 19 ft. |
| Stowed Height | 64.5 in. |
| Width | 32 in. |
| Lift Capacity | 550 lbs. |
| Power | Battery |
| Weight | 2,580 lbs. |
LIFT-PLATFORM,(26FT/46IN)WIDE
| Working Height | 32 ft. |
| Platform Height | 26 ft. |
| Stowed Height | 70.5 in. |
| Width | 46 in. |
| Lift Capacity | 1,000 lbs. |
| Power | Battery |
| Weight | 4,700 lbs. |
LIFT-PLATFORM,(32FT/46IN)WIDE
| Working Height | 38 ft. |
| Platform Height | 32 ft. |
| Stowed Height | 74 in. |
| Width | 46 in. |
| Lift Capacity | 700 lbs. |
| Power | Battery |
| Weight | 5,075 lbs. |
LIFT-PLATFORM,(32FT/68IN)4WD
| Working Height | 38 ft. |
| Platform Height | 32 ft. |
| Stowed Height | 69 in. |
| Width | 68 in. |
| Lift Capacity | 1250 lbs. |
| Ground Drive | 4-Wheel Drive |
| Power Rating | 31 hp. |
| Fuel Type (Dual) | Gas / Propane |
| Weight | 7,660 lbs |
LIFT-ROUSTABOUT,(15FT)1500LBS
LIFT-STRAIGHT, (45FT W/4WD)
| Working Height | 51 ft. |
| Platform Height | 45 ft. |
| Horizontal Reach | 36 ft. 8 in. |
| Width | 7 ft. 6 in. |
| Lift Capacity | 500 lbs. |
| Ground Drive | 4-Wheel Drive |
| Power Rating | 46 hp. |
| Fuel Type | Diesel |
| Weight | 14,790 lbs. |
LIFT-STRAIGHT, (65FT W/4WD)
| Working Height | 71 ft. |
| Platform Height | 65 ft. |
| Horizontal Reach | 56 ft. 2 in. |
| Width | 8 ft. 2 in. |
| Lift Capacity | 500 lbs. |
| Ground Drive | 4-Wheel Drive |
| Power Rating | 46 hp. |
| Fuel Type | Diesel |
| Weight | 24,270 lbs. |
LIFT-STRAIGHT, (85FT W/4WD)
|
Working Height
|
91 ft.
|
|
Platform Height
|
85 ft.
|
|
Horizontal Reach
|
76 ft. 6 in.
|
|
Width
|
8 ft. 2 in.
|
|
Lift Capacity
|
500 lbs.
|
|
Ground Drive
|
4-Wheel Drive
|
|
Power Rating
|
63 hp.
|
|
Fuel Type
|
Diesel
|
|
Weight
|
38,000 lbs
|
LIFT-UP & OVER,(45FT W/4WD)
| Working Height | 51 ft. |
| Platform Height | 45 ft. |
| Horizontal Reach | 25 ft. |
| Width | 7 ft. 6 in. |
| Lift Capacity | 500 lbs. |
| Ground Drive | 4-Wheel Drive |
| Power Rating | 46 hp. |
| Fuel Type | Diesel |
| Weight | 13,875 lbs. |
LIGHT TOWER-(1,000 WATT)
LIGHT TOWER-(4,000 WATT)-TOW
LOADER -------- TRACK,(T190)
LOADER-DINGO, (420)
The new diesel models deliver what customers want: extra torque, longer engine life, and increased hydraulic flow for enhanced performance of ground-engaging attachments. And because they're part of the full-line family, these diesels are compatible with all of Toro's compact utility loader attachments.
LOADER-SKID STEER, (S650)
The new Bobcat® S650 skid steer loader is part of the M-Series. With its vertical lift path, the S650 gives you increase lifting capacity and provides greater forward reach at full lift height for loading over dump trucks. Like all M-Series models, the S650 has an industry-leading cab design that offers improved visibility and operator-friendly features such as cab forward design with the optional pressurized cab, air ride seats and seat-mounted joysticks. The S650 has powerful hydraulics, top digging and pushing power, and increased fuel capacity. Stay productive with simple maintenance checks and simple design. To help you become even more productive, Bobcat offers more attachments for more carriers than anyone in the industry. Bobcat is the only major compact equipment company that manufactures a majority of its attachments
LOADER-SKID STEER,(S175)
LOADER-SKID STEER,(S70)
The compact Bobcat S70 skid-steer loader is small enough to get in the tight spots, yet tough enough to get you out. This agile little workhorse is only 6 feet tall and 36 inches wide, it’s the perfect loader whenever the job is too big for a shovel or the space is too small for a larger machine.
LOCATOR-SeeTech SR-60
SeeTech SR-60 can Locate:
-
SeeSnake In-Line Transmitters.
-
Remote Transmitters (Sondes).
-
Energized Metallic Lines.
-
Energized Electical Lines
-
Approach the transmitter from any direction for faster, more accurate locates.
-
Verify the locate using the large mapping display.
-
Depths of greater than 15’ can be read.
LOCATOR-TRANSPOINTER-HILTI
Makes it easy to locate and measure exit holes in floors and walls up to 4 feet thick!
MAGNET-PUSH,(36IN)
- Made with permanent ceramic magnets to pick up nails and scrap metal
- Magnets are enclosed in a heavy duty outer casing
- Lightweight steel handle
MISSLE-3IN.(AIR)
MIXER-CONCRETE,(9CU.FT)
Large Heavy Duty Side Dump. A generous 9 cu. ft. capacity for large batches
MIXER-CONCRETE,(ELECTRIC)
MIXER-MORTAR,----(7CU.FT)
MOLE-BORING, (2IN - 6IN)
Underground boring machines are use to put pipe, cable or conduit under paved surfaces. The Porta Mole will bore 2" to 6" diameter and 100’ in length in sand, clay and hard rock soil conditions.
MONITOR-DIGITAL CS-10
-
12" color monitor with sunshield.
-
USB Flash Drive
-
Hands-free audio recording.
MOWER-BILLYGOAT,(BRUSH CUTTER)
The Outback® Brush Cutter cuts a clear path through the densest brush, grass and weeds over 8 feet tall, saplings up to 3/4 of an inch in diameter and other problem vegetation at the rate of 2/3 acre per hour.
MOWER-BOBCAT,(AMMBUSHER)-5FT
The bushog mulches small bushes and sapplings, up to 3" in diameter, and cuts through the thickest grass and brush. The bushog is ideal for clearing undeveloped property, construction sites, trails, ditches and more.
MOWER-COMMERCIAL,(60IN)RIDE
MOWER-DINGO,(42IN./BUSHOG)
Hydraulic mower attachment for the dingo walk behind loader. The mower is capable of cutting up to 2" sapplings.
MOWER-S.P.W/BAG
NAILER--T&G--(AIR)
- High-speed mallet actuated pneumatic operation increases productivity over manual methods
- Extra-wide composite base plate for added stability
- Long reach handle for improved comfort and control
NAILER--T&G--(W/HAMMER)
NAILER-COIL,-------(AIR)
NAILER-FACE,(W/HAMMER)
NAILER-FINISH,----(AIR)
NAILER-FRAMING,(AIR)
NAILER-POWERJACK
NAILER-ROOFING,(AIR)
OZONE-GENERATOR
Designed for hotels, hospitals, and homes 0 - 1000 mg/hr output 0.55 amps at maximum output 1 hour timer 30000 cu ft treatable area 115 CFM air movement 6' removable power cord 14 lbs. 12"x7"x9" (LxHxW) lightweight
PLANE-CONCRETE,(8IN)
-
8" working width will scarify approximately 350-500 sq. ft. per hour at Depth Per Pass of 1/8"
-
Removes traffic lines at 800-1,000 lineal ft. per hour
-
Sidewalk trip hazard repair
-
Concrete and coatings removal
-
Floor cleaning and/or preparations
-
Creating non-slip surfaces
-
Traffic line and markings removal
PLANE-DOOR,(ELECTRIC)
-
Heavy-duty 7.0 Amp motor provides a smooth, even finish in the hardest of woods
-
3/32" (2.5mm) maximum cut in one pass reduces the amount of passes on your material
-
Calibrated Depth Adjustment Knob for accurate depth setting and eliminating the need to re-zero your depth
PLUG-SET,(GREENLEE)
Use with PVC Heating Blankets or Electric Heaters to plug the ends of the PVC being heated.
- The trapped air will help keep the PVC from collapsing while forming the bend.
- Use on Schedule 40 and 80 PVC.
- Available in 2" - 4" set
POST DRIVER,(MANUAL)
POST DRIVER,(RHINO)
POST PULLER
POST-SHORING,(5000LBS.10FT)
POSTHOLE DIGGER,(1-MAN)
POSTHOLE DIGGER,(1-MAN/HYD)TOW
- Variable speed, Forward and Reverse auger rotation
- Three handlebar positions; two for normal drilling and one for close up drilling and towing
- Drilling head pivots from side to side for drilling on uneven terrain
- No torque to the operator
- Engine frame swivels to keep engine level for optimum performance
- Auger locks up out of the way for easy maneuvering
- Includes tow bar with 2” hitch coupler
- 7/8” square auger drive fits all Ground Hog augers up to 18"
- 9hp Honda engine
- 275 ft. lbs. of torque and 140 rpm approx. max. auger speed
POSTHOLE DIGGER,(2-MAN)
POSTHOLE DIGGER,(BOBCAT)
Maximum auger diameter 36" Available 8", 12", 18", 24", 30", and 36" augers. Reverse rotation for quick backout when obstructions are encountered
POSTHOLE DIGGER,(DINGO)
The high torque (power) translates into the Dingo’s capability to dig 30" holes up to 5’ deep in clay, gravel, sandstone and many other soil conditions.
POSTHOLE DIGGER,(MANUAL)
PROJECTION SCREEN,(6X6)
PROJECTOR-MULTIMEDIA
- Offers brightness of 3000 ANSI lumens
- 2100:1 (full on/full off) contrast ratio delivers excellent video images
- Eco-mode to extend lamp life and for quieter operation
- Integrated zoom lens and automatic vertical keystone correction
- Full connectivity — Supports PC, S-video, composite video, component video via VGA and RS-232 connectors
- Supports full range of television and video standards, including NTSC, NTSC 4.43, PAL, PAL-N, PAL M, SECAM and HDTV (480i/P; 576i/P, 720P; 1080i)
- Includes cables, remote control and a drop-tested hard carrying case
PRUNER-TREE,(2/CYCLE)
Cutting and trimming tall branches can be a difficult chore, if you don’t have the right tool. For times when a chain saw can’t be safely used, pole pruners are ideal for quickly and easily cutting those out-of-reach branches.
PRUNER-TREE,(MANUAL)
PULLER-CABLE,(ULTRA/TUGGER)
PULLEY-10IN.,(WELL WHEEL)
PUMP-2IN.(CENTRIFUGAL)
PUMP-2IN.(PUDDLESUCKER)-ELEC.
PUMP-2IN.(SUBMERSIBLE)-ELEC.
PUMP-3/4(POOL COVER)-ELECTRIC
PUMP-3/4(SUBMERSIBLE)-ELEC.
PUMP-3/4(WATER BED)
PUMP-3IN.(CENTRIFUGAL)
PUMP-HYDROSTATIC TEST,(500PSI)
PUMP-VACUUM,(25MICRONS)
RAKE-ELIMINATOR,(DINGO)
RAKE-HARLEY,---------(BOBCAT)
This skid steer attachment is good for tearing out old sod, grading topsoil pulverizing dirt clumps, preparing seed/sod beds.
RAKE-YORK,4FT.(PULL)
RAMP-LOADING,(10FT.X 30IN)
REAMER-PIPE,(3IN)
ROLLER-PULL,(650LBS)
ROLLER-PUSH,(250LBS)
- 18" diameter x 24" wide.
- Poly construction for rustproof durability
- drum capacity...250lbs (water)
- Lightweight when empty, for easy transporting and storage.
ROLLER-TILE,----(100LBS)
ROLLER-VIB, (SHEEP’S FOOT)
ROLLER-VIB.RIDE, (5-TON)
ROLLER-VIB.RIDE,(1.5-TON)
ROLLER-VIB.RIDE,(10-TON)
ROLLERS-MACHINERY,(60TON)
ROLLERS-MACHINERY,--(8TON)
ROPE-CABLE PULLER, (600FT)
Double-Braided Composite rope 7/8 in. X 600 ft.
ROUTER
SANDBLASTING POT,(300LBS)
SANDBLASTING POT,--(35LBS)
SANDBLASTING-HOOD,(AIR)
SANDBLASTING-SIPHON,(AIR)
SANDBLASTING-WET
SANDER-BELT,(3IN.X 24IN)
SANDER-DISC,(DRYWALL)
Using the Porter Cable 7800 Drywall Sander you will finish walls and ceilings 3 to 4 times faster than with conventional methods. Clean up is minimized when used with a vacuum attached to the tool, and finish is superior to other finishing methods. Operator can sand 10' ceilings without using stilts or a scaffold.
Note: Does not include vacuum.
SANDER-EDGER
- Sands wood floors right up to the baseboard
- Precision balanced sanding pad, swivel dust bag support reduces bag wear
- 600 cu in capacity, fine filter dust bag
- Non-marking roller guard
- Uses exclusive hook and loop sanding pad and sand paper
SANDER-FLOOR
- Removes imperfections and old finishes to prepare for varnishing and polishing
- Available with exclusive hook and loop drum for no-tool paper changes
- Secured belt-guard, easy tilt wheels to engage with the floor
SANDER-OSCILLATING,(PALM)
Accepts 5", 8-hole hook & loop paper allows sanding discs to be switched back and forth quickly and easily
SANDER-OSCILLATING,(STD)
SANDER-RADIATOR
- Sands wood floors right up to base board underneath radiators
- Sands underneath railings on decks or porches
- Available with exclusive hook and loop sanding pads and paper
SANDER-SQUARE BUFF
SANDER-U-SAND
SAW-BAND
SAW-BRICK/BLOCK, (14IN)GAS
•Rolling table will accomodate 16" blocks
•Portable model with 14” blade capacity
•Rounded blade guard with splash proof protection
•Universal cutting table with water drain holes and centered wood block eliminates cutting through tables
•Side-Mounted handles for balanced lifting load
•Vacuum hookup optional for dust-free cutting
•1/4" steel arbor wrench with saw-mounted wrench holder
•Adjustable cutting head can be used manually or locked in a fixed position
•Quick adjusting heavy-duty bearing assemblies for easy blade alignment
•Choose between optional folding upright stand or expandable ProCart for convenient working height
SAW-BRICK/BLOCK,(14IN)ELECTRIC
SAW-CHOP,(14IN)
SAW-CIRCULAR,(7-1/4IN)
SAW-CONCRETE,(14IN/ AIR)
SAW-CONCRETE,(14IN/GAS)
-
Short-run slab cutting
-
Contraction joints
-
Patch repairs in asphalt
-
Traffic loop installation and trenching
SAW-CONCRETE,(16IN/ELECTRIC)
SAW-CONCRETE,(20IN/GAS)
SAW-CONCRETE,(24IN/GAS)
SAW-CUT/OFF,(12IN.BLADE)
SAW-CUT/OFF,(14IN.BLADE)
SAW-CUT/OFF,(16IN.BLADE)
SAW-CUT/OFF,(ELECTRIC)--14IN
SAW-CUT/OFF,-----------(AIR)-14IN
SAW-JAMB
- Cuts flush to floor to underlay vinyl along walls
- Cuts high enough to fit in ¾” wood floors
- Fully undercuts inside corner
- Comes with carbide blade
SAW-JIG
SAW-MITER,(10IN)
SAW-MITER,(15IN)
SAW-MITER,(COMPOUND SLIDE)
SAW-TABLE,(10IN.WOOD)
SAW-TILE/BRICK,(10IN.WET)
SAW-TILE/BRICK,(25IN DEEP)
SAW-TILE/TUB,-----(8IN.WET)
SAW-TOE KICK
Cuts flush to the wall and to a maximum depth of ¾”for easy removal of underlayment
SAWZALL-(ELECTRIC)
- Keyless stainless steel blade clamp for quick and easy blade changes and increased reliability
- Keyless adjustable shoe easily adjusts depth of cut and extends blade life
- Variable speed control dial matches the correct speed for the application for increased versatility and control
SCAFFOLD-BRACE,(7FT-WIDE)
SCAFFOLD-FRAME,(4.5FT X 5FT)
SCAFFOLD-FRAME,(6.6FT X 5FT)
SCAFFOLD-GUARD RAIL,(UTILITY)
SCAFFOLD-GUARD RAILS,(STAND)
SCAFFOLD-HOIST ARM
SCAFFOLD-LEVELER,(STANDARD)
SCAFFOLD-LEVELER,(UTILITY)
SCAFFOLD-OUTRIGGER,(STANDARD)
SCAFFOLD-OUTRIGGER,(UTILITY)
SCAFFOLD-SIDE BRACKET,(SINGLE)
SCAFFOLD-UTILITY,(2.5FT X 3FT)
SCAFFOLD-UTILITY,(2.5FT X 6FT)
These units are easy to assemble, lightweight and are perfect for all types of interior work. They can even be used on stairs. This rental item includes, two (2) adjustable siderails, one (1) walkboard and four (4) wheels. Outriggers, levelers and guard rails are rented separately.
Dimensions: 6'L x 29"W x 6'H
SCAFFOLD-WALKBOARD,(7FT)
SCAFFOLD-WHEEL,(8IN.)
SCRUGUN,(COIL)-STAND
Adjustable depth control for repeatable countersinking no raised screw heads.
Drives 1" to 3" screws - slight adjustment required.
Reversible
No more dropped or lost screws.
Ergonomically friendly - no more reaching for every single screw, can be fitted with extension handle - work while standing up.
SCRUGUN-(ELECTRIC)
- High torque for deck building, drywall and heavy gauge steel stud framing
- Depth-sensitive, "set and forget" nosepiece for consistent fastener depth
- Two-finger, rubber trigger for increased comfort
SEEDER-HYDRO,(600GAL)FINN
Hydroseeding is more efficient that sodding, broadcast seeding, or any other method of establishing turf or controlling erosion.
SEEDER-SLIT,(20LB/HOPPER)
The S22 Seeder makes turf renovation simple and easy. The S22 is well balanced and portable thanks to the placement of the polymer seed hopper and its folding handle. The seed gate is also adjustable to accommodate a broad range of grass seed.
SHEARS-SHEET METAL,(12GA)
Capacity (Mild Steel) 12 ga.
Capacity (Stainless Steel) 14 ga.
Cuts radius as small as 1" for various applications
SHORING-TRENCH,(ALUMINUM)
Provides effective protection for contractors working in trench applications in a variety of soil conditions.
SHORING-TRENCH,(STEEL)
Provides effective protection for contractors working in trench applications in a variety of soil conditions.
SHOT BLASTER, (750SQ.FT/HR)
SHOT BLASTER,(750SQ.FT/HR)
SNAKE-DRILL,(25FT)
SNAKE-ELECTRIC EEL
This is the best unit available for tougher blockages such as TREE ROOTS and for longer runs in main sewer lines.
SNAKE-ELECTRIC EEL,(CABLE)
SNAKE-JETTER,(3000PSI/200FT)
Penetrates and cleans tough problems from pipe walls. Such as: Sludge, Grease, Sand, Soap, Dirt and Debris.
SNAKE-SPOOL,(LARGE)100’ X 5/8
The Easy Rooter is a tough, easy-to-use machine. Plated cage holds 100 ft. of 5/8" cable. The easy rooter clears the main sewer line of a home or business.
SNAKE-SPOOL,(MEDIUM)75’ X 1/2
The EasyRooter jr clears lines from rooftop to basement, including kitchen, bath and laundry drains. The plated cage with an inner drum carries 75 ft of 1/2" cable.
SODABLASTER, (100LBS)
SOLDERING TOOL,(1/4IN,1-1/2IN)
-
Designed for soft soldering (50/50, 95/5 Alloys) 1/4" - 1 1/2" Copper Tube.
-
Flameless soldering – easy-to-use.
-
Six feet of cable.
-
Built-in handle and cord wrap.
-
Specially designed for repair and renovation jobs.
SPLITTER-LOG,(20TON)
Lumber-Jax vertical style log splitter (20 ton) features heavy duty construction for years of reliable service
SPRAYER-AIRLESS PAINT
SPRAYER-HAND,-(3GAL)
SPREADER-PUSH,(2’DROP/ROTARY)
STAND-REEL,(GREENLEE)
STAPLER-CARPET,(ELECTRIC)
STAPLER-ROOFING,--(AIR)
STAPLER-SUBFLOOR,(AIR)
The N5008AC Construction Stapler is used for construction work such as wall sheathing, roof decking, and subflooring.
STAPLER-T&G,(3/8IN.AIR)
- Tool-free adjustable foot adapts from 1/4" to 1/2" engineered flooring
- 20-gauge fastener helps prevent damage to flooring
- Lightweight magnesium design for added durability
- Oil-free operation requires no regular maintenance and eliminates the risk of oil stains
- Ultra-quiet rear exhaust directs air away from the user
STEAMER-DRAPERY, (ELECTRIC)
STEAMER-VAPORLUX, (CLEANER)
VaporLux can be used for restoration on many surfaces, some of the most frequently talked about are tile and grout, hardwood and commercial kitchen equipment. The results are the same on most surfaces, colors are more vibrant, details are finer, and things look newer.
| Power supply | 110V, (12V at handle) |
| Power | 1,600 Watts |
| Boiler capacity | 1.29 Gallons |
| Vapor pressure | 72 P.S.I. max |
| Vapor regulator | 0-72 P.S.I. |
| Boiler temperature | 311º F |
| Machine housing | 304 Stainless Steel |
| Unit Weight | 25 lbs.(Empty) |
| Cart | Extruded Aluminum |
STEAMER-WALLPAPER,(ELECTRIC)
- Profiled step for safe, comfortable working platform
- 2 gallon anodised water tank
- Lightweight anti-coil steamplate
- Steam hose – 15 feet long
- Anti-kink Coolrun hose
- Integral water level indicator
- Neon on/off switch, two thermal protection devices
STEEL-ASPHALT SPADE
STEEL-BUSHING TOOL
STEEL-CHISEL,(1IN)
STEEL-CHISEL,(3IN)
STEEL-GROUND ROD DRIVER
STEEL-POINT
STILTS-DRYWALL,(18IN-30IN)
STRETCHER-FENCE
STRIPER-PARKING LOT,(E-Z)
STRIPPER-RIDE, (PROPANE)
The workhorse in floor removal technology, the 60HP Terminator T-2100PRO is designed to meet the needs of the most demanding removal project. Utilizing Innovatech’s unique "Cool Flow" hydraulic system, dual joystick design, integrated swivel head, and 15 years of experience the T-2100PRO has no equal. The new T-2100PRO is capable of removing VCT, carpet, ceramic, hardwood, roofing material, sports courts, and just about any other flooring material. Power, solid design, reliability, ease of operation, and the experience to back it up make the T-2100PRO the only choice for the serious contractor.
STRIPPER-RIDE,(BATTERY)
Features:
• On board, built-in charging system has the versatility to plug into any outlet
• Does not produce harmful fumes, allowing machine to be used on almost any jobsite
• Allows extended run time
• Has the ability to operate 8 to 10 hours on a single charge regardless of the floor application - no need for multiple battery sets
• Comfortable to ride and drive
• Ergonomically designed controls for safe and easy handling
• Precise hydraulic steering for maneuvering in tight spaces
• Built-in charging system
• The unique swivel head keeps the blade in contact with the floor
• Sliding front plate allows for exact blade angle
• Adjustable blade pitch and angle
• Zero turn radius
• Non-marking tires
STRIPPER-SHINGLE,(MANUAL)
STRIPPER-TILE,(BULL)
Features
- Unique self propulsion can be used either manually or in automatic mode
- Drive unit has variable speed, thus matching removal rates to floor covering being removed
- Ram action is a direct drive application
- Brushless motor
- Height adjustable and vibration dampened handle maximizes operator comfort
- Stable, balanced lifting point
- Inboard weights are adjustable to three positions, ensuring maximum blade pressure for difficult removals
- Removable weights and well balanced design enhance transportability
STRIPPER-TILE,(ELECTRIC)
- Remove up to 200 sq. ft. per hour of vinyl or other related soft material (Square footage amounts and time schedules will vary based on material and adhesion)
- Folding handle for easy transport & storage
- Heavy-duty steel material deflector shield
- Quick release pin angle adjustment
- 7-Gauge steel welded construction
- Push plate & built-in weight make material removal a quick & easy job
STRIPPER-TILE,(POLE- 8CFM)
Air-Powered EDCO Chisel Scalers eliminate hammers, chisels and hand labor!
•Ergonomic design lets operator stand upright eliminating backaches
•Removes up to 200 sq. ft. per hour of 4" ceramic tile set in standard thin-set
•Provides 2,500 hits per minute
•High-strength tubular handle and soft foam hand grips for operator comfort
•Quick-change, hardened steel tool chuck accepts dozens of accessories
•Available in heavy-duty steel or lightweight aluminum
•Requires only 6-8 CFM at 80-90 PSI
Removes:
•Tiles(vinyl, ceramic, quarry...)
•Carpeting
•Roofing Materials
•Fireproofing
•Rubber coatings
•Waterproofing
•Linoleum
•Insulation
•Asbestos
•Mastics
•Paint build-up
•Ice
STRIPPER-TILE,(POLE-15CFM)
Air-Powered EDCO Chisel Scalers eliminate hammers, chisels and hand labor!
•Remove up to 300 sq. ft. per hour of 4" ceramic tile set in standard thin-set
•Provides 3,500 hits per minute
•High-strength tubular handle and soft foam hand grips for operator comfort
•Extra large piston for harder hitting action
•Quick-change, hardened steel tool chuck accepts Big Stick accessories
•Big Stick available in heavy-duty steel or lightweight aluminum
•Requires 12-15 CFM at 90 PSI
Removes:
•Tiles (vinyl, ceramic, quarry...)
•Carpeting
•Roofing materials
•Fireproofing
•Rubber coatings
•Waterproofing
•Linoleum
•Insulation
•Asbestos
•Mastics
•Paint build-up
•Ice
STRIPPER-TILE,(TURBO)
•Totally self-propelled, with instant forward
•Variable Speed, 10-45 feet per minute
•Whisper quiet technology, operate in any occupied area
•Electrical overload protection
•Durable steel housing
•Runs on 13 amps, no more tripping circuit breakers
•Easy to operate hand-controlled clutch for speed & safety
STUD-DRIVER,(EXTENSION/6FT)
STUD-DRIVER,(LOW VELOCITY)
The fully automatic tool that is fast, reliable, versatile and easy to use.
SUCTION CUPS,(8IN-PAIR)
Hand cups use vacuum to lift and carry loads,
A manual pump removes air from between the rubber pad
and the contact surface; There is a red line on the pump's
plunger that serves as a vacuum indicator; a check valve
allows the user to repump the cup without removing it from
the contact surface; and a release mechanism allows the
cup to disengage completely from contact surface.
Model Pad Diameter Max. Load Capacity
N4950 8 Inch 125 Pounds
SWEEPER,(BOBCAT)
You can sweep, collect and dump dirt and other debris with just one attachment.
TAMPER-AIR
TAMPER-HAND,(10X10)
TAMPER-JUMPING JACK,(STANDARD)
TAMPER-JUMPING JACK,(TRENCH/FOOT)
TAMPER-PLATE,(STANDARD)
TANK-PRESSURE WASHER,(55GAL)
TANK-PROPANE,(100LB)
TANK-PROPANE,--(20LB)
TANK-PROPANE,--(40LB)
THREADER-PIPE,(1/2TO 2)ELEC.
- Heavy-duty hand-held power drive.
- Features reversible 115V universal motor.
- Capacity 1/8"-2" (3mm-50mm) pipe. Designed for RIDGID No. 12R die heads.
- CSA approved.
- Approved to UL standards (NRTLC).
THREADER-PIPE,(1/4TO 1-1/4)
THREADER-PIPE,(3/4-2)--#300
- RIDGID speed chuck.
- Reversible 1/2 HP universal motor.
- Capacity: 1/8"-2" (3mm-50mm) pipe, 2 1/4"-4" with 141, and 4"-6" with 161 Geared Threaders; 1/4"-2" (6mm-50mm) rod.
- Recessed On/Off/Reverse switch.
- CSA approved.
- Approved to UL standards (NRTLC).
THREADER-PIPE,(4-6)-----#161
Used with the Ridgid #300 pipe threader
TILLER,(13HP)---REAR TINE
TILLER,--(3HP)-CULTIVATOR
- Easy starting Honda mini 4-stroke engine
- Less than 29 lbs
- Tills 9" wide
- Patented Honda hybrid tines for unsurpassed performance
- Fastest tine speed - 294 RPM
TILLER,--(4HP)-FRONT TINE
TILLER,--(5HP)-FRONT TINE
TILLER,--(8HP)---REAR TINE
- Easy starting Honda commercial OHV engine
- 20" tilling width
- 12" tine diameter
- Convenient "loop handle" design allows operation from either side
- Self propelled - 3 forward speeds, 1 reverse
- Commercial grade construction
TILLER-ATTACHMENT 3FT, (DINGO)
Break through hard soil conditions up to 6" deep. Avoid clogging the tiller by using one easy hand control to reverse the direction of the tiller to clear jams from rocks and debris.
TONGS-BRICK
TORCH-OXYGEN/PROPANE
TRAILER--SINGLE AXLE, (W/RENTAL)
The use of this trailer is only for transport of ABC Equipment Rental's heavy equipment.
TRAILER-DUMP,(6FT X 12FT)
-
These trailers offer many versatile applications, from a jobsite dumpster to equipment trailer to delivery truck to dump truck. It’s four products in one.
-
The EZ6812LP holds up to 5.15 cubic yards
TRAILER-TANDEM AXLE, (W/RENTAL)
The use of this trailer is only for transport of ABC Equipment Rental's heavy equipment.
TRAILER-U/CART,(W/CONCRETE)
TRANSMITTER-SeeTech ST-510
Features
Direct Connect using attached Clips
Induction from the optimal Inductive Signal Clamp
Induction from the Transmitter Coils
Specifications
Frequencies: 128Hz, 1kHz, 8kHz, 33kHz
Output Power: 10 Watt, Variable
Display: LCD
Weight: 8.9 lbs.
TRAP-ANIMAL,(LARGE)
These traps are light-weight and extremely easy to operate, with a hand protection plate to keep the animal from scratching you while you are carrying the trap.
TRAP-ANIMAL,(SMALL)
These traps are light-weight and extremely easy to operate, with a hand protection plate to keep the animal from scratching you while you are carrying the trap.
TRENCHER-924,(2FT.BOOM)-WALK
The innovative new 912 self-propelled trencher is perfect for the landscape contractor or homeowner with smaller trenching applications such as sprinkler systems.
TRENCHER-ATTACHMENT,(DINGO)
High-torque, heavy-duty drive system guarantees performance in any soil condition from rock to clay
TRENCHER-TRACK,(42in.BOOM)-WALK
TRIMMER-HEDGE, (POLE)
- Head adjusts 270° (135° working range) in 13 locking positions without tools
- 135° head folds flat for transport and storage convenience
- 24 inch cutting blade double-sided
- Extended length pole for more reach
TRIMMER-HEDGE,24IN.(2/CYCLE)
- Lightweight and well-balanced design with low vibration levels
- Rear swivel handle for improved comfort at various speeds
- 24" double-sided blade length
- Tip protector
TRIMMER-HEDGE,24IN.(ELECTRIC)
- 24 inch bar with double sided blades
- 120v 4.5amp motor
- Requires standard extension cord
TROWEL-POWER,(48IN)
- Quick-Pitch Handle for rapid blade changing
- Combination blades
- 48" width
- Purchase of blades required
VACUUM-INSULATION
Insulation Removal Vacuum – Versa-Vac 18 – Top Of The Line 18 HP Workhorse
When you need the most power and handling capacity you can get to take care of the toughest and messiest jobs, the Versa-Vac 18 is your best choice. The Versa-Vac 18 insulation removal vacuum is designed for removal of blown-in insulation as well as fire, water, and smoke damaged insulation in attics, sidewalls and crawl spaces. Material can be discharged directly into 75 cu. ft. disposable bags or directly into a Dumpster.
VACUUM-LAWN
Whether it is residential clean-up for your patio, lawn, driveway, walkway, shrubs, beds, decks, pool areas, trees, parking lots, or fence line – Billy Goat’s lawn vac eats and bags all your yard clean-up chores.
VACUUM-WET/DRY,(10GAL)
Perfect for home use, contractors, woodworkers, drywallers, autoshops.
Good for wet or dry material
VENTILATION-DUCT,(25FT)
VIBRATOR-CONCRETE
VICE-PIPE,(TRI-STAND)
- Integral legs and tray fold in for easy carrying and setup. Large vise base overhangs front legs for clear tool swing.
- Complete with slots for hanging tools, pipe rest, three-pipe benders, and ceiling brace screw.
- Model 460 features a larger work surface for increased pipe capacity, 6" diameter, rear support and receding ceiling brace screw
WALKBOARD--(12IN X 12FT)
- Heavy Duty Rung System
- Raised and "Abraded" Decking
- Cast Aluminum Handle-Style Endcaps
WALKBOARD--(14IN X 20FT)
- Heavy Duty Rung System
- Raised and "Abraded" Decking
- Cast Aluminum Handle-Style Endcaps
WALKBOARD--(14IN X 30FT)
- Heavy Duty Rung System
- Raised and "Abraded" Decking
- Cast Aluminum Handle-Style Endcaps
WALKBOARD-EXP.(8FT-13FT)
The telescoping plank has the strength to do the job safely, and the compactness to store easily after the work is done.
WAND-EXTENSION,(18FT)
Reach high places safer and easier with light-weight fiberglass telescoping wand.
| Pressure | 2,000 psi.- 3,000 psi. |
| Working Range | 6 ft.- 18 ft. |
| Material | Fiberglass |
| Weight | 6 lbs. |
WASHER-PRESSURE,C.W.(2000PSI)GAS
Pressure washers can boost water pressure from your garden hose as much as sixty times. With this increased pressure you can blast away deck and siding mildew, clean driveways and parking lots and other areas quickly and easily.
| Pressure | 2,000 psi. |
| Gallons per Minute | 2.8 gal. |
| Power Rating | 5.5 hp. |
| Fuel Type | Gasoline |
| Length | 37 in. |
| Width | 21 in. |
| Height | 24 in. |
| Weight | 155 lbs. |
WASHER-PRESSURE,C.W.(3000PSI)GAS
Package includes 50 ft of pressure hose and 3ft. wand, extra hose and telescoping wand available.
| Pressure | 3,000 psi. |
| Gallons per Minute | 3.5 gal. |
| Power Rating | 11 hp. |
| Fuel Type | Gasoline |
| Length | 45 in. |
| Width | 26 in. |
| Height | 24 in. |
| Weight | 200 lbs. |
WASHER-PRESSURE,H.W.(3000PSI)G
Package includes 50 ft of pressure hose and 3ft. wand, extra hose available.
| Pressure | 3,000 psi. |
| Gallons per Minute | 3.5 gal. |
| Power Rating | 11 hp. |
| Engine Fuel Type | Gasoline |
| Burner Fuel Type | Kerosene |
| Length | 45 in. |
| Width | 30 in. |
| Height | 43 in. |
| Weight | 530 lbs. |
WEED EATER, (ELECTRIC)
| Voltage | 120 v 60 hz |
| Motor Output | 600 w (5.3amps) |
| Weight | 8.8 Lbs. |
| Cutting Swath | 14 inch |
WEED EATER,(2/CYCLE)
Ideal for long periods of use, you can let the harness help carry the weight of the FS 110 bike handle trimmer. Capable of handling tough jobs, this STIHL grass and weed trimmer not only has quick, smooth acceleration and a revolutionary low-emission engine design—it’s well balanced with a lightweight low-profile design, making it comfortable to use for long periods.
WELDER-130AMP.,(WIRE FEED)
- Light Fabrication
- Maintenance and Repair
- Auto Body
- Farm and Ranch
- Home
WELDER-180AMP.,(PORTABLE)
WELDER-200AMP.,(230VOLT)
WELDER-300AMP.
WHEEL-MEASURING
WHEELBARROW,(6CU.FT)
Construction grade wheelbarrows are made for the serious mason contractor or concrete contractor. Also perfect for general jobsite clean up and home owner use.
WRENCH-IMPACT,---1IN.(AIR)
WRENCH-IMPACT,1/2IN.(AIR)
WRENCH-IMPACT,1/2IN.(ELECTRIC)
WRENCH-IMPACT,3/4IN.(AIR)
WRENCH-IMPACT,3/4IN.(ELECTRIC)
WRENCH-PIPE,(36IN)
WRENCH-PIPE,(48IN)
WRENCH-PIPE,(60IN)